Troubleshooting - Sony KV-28LS60U Instruction Manual

Troubleshooting

Here are some simple solutions to problems which may affect the picture and sound.
Problem
No picture (screen is dark) and no
sound.
Poor or no picture (screen is dark), but
good sound.
No picture or no menu information
from equipment connected to the Scart
connector.
Good picture, no sound.
No colour on colour programmes.
Distorted picture when changing
programmes or selecting teletext.
Picture slanted
Noisy picture when viewing a TV
channel.
No unscrambling or unstable picture
whilst viewing a scrambled channel
with a decoder connected through the
Scart connector
Remote control does not function.
The standby indicator
flashes.
If you continue to experience problems, have your TV serviced by qualified personnel.
Never open the casing yourself.
22
Additional Information
Solution
• Check the aerial connection.
• Plug the TV in and press the
• If the standby indicator
• Using the menu system, select the "Picture
• Check that the optional equipment is on and press the
• Press the
• Check that "TV Speakers" is "On" in the "Detail Set Up"
• Check that headphones are not connected.
• Using the menu system, select the "Picture
• Turn off any equipment connected to the Scart
• Using the menu system, select the "Picture Rotation"
• Using the menu system, select the "Manual
• Using the menu system, select the "Noise Reduction"
• Using the menu system, select the "Set Up" menu. Then
3 3
/ .
S
• Check that the Media Selector on the remote control is set
• If the remote control does not operate the VCR or DVD
• Replace the batteries.
• Contact your nearest Sony service centre.
on the TV
the TV.
the remote control.
Adjustment" menu and select "Reset" to return to the
factory settings.
button repeatedly on the remote control until the
correct input symbol is displayed on the screen.
+ button on the remote control.
menu.
Adjustment" menu and select "Reset" to return to
factory settings.
connector on the rear of the TV.
option in the "Detail Set Up" menu to correct the
picture slant.
Programme Preset" menu and adjust Fine Tuning
(AFT) to obtain better picture reception.
option in the "Detail Set Up" menu and select
"Auto" to reduce the noise in the picture.
enter to "Detail Set Up" option and set "AV3 Output" to
"TV".
to the device you are using (VCR, TV or DVD).
even when the Media Selector has been set correctly. Enter
the necessary code set as explained on "Remote Control
Configuration for VCR/DVD" chapter of this instruction
manual.
button on the front of
is on, press TV button on