Table of Contents
Advertisement
4. USAGE
4.2.5 Malfunction display
There will be malfunction code showing on the controller screen when relative malfunction occurs.
If there are more than one malfuctions occurs at the same time, you can check the current error codes
list by pressing "
" or "
You can refer to the malfunction table to find out the failure cause and solution. For example：
4.3. Parameter table
Set-point of auto mode target temp.
Remark:
The wire controller can display the temperature unit as "℉" or "℃" according to the unit Model
you bought.
11
" key.
Meaning
Water Inlet Temp. Sensor failure
Default
Remarks
27
Ajustable
Hide quick links:
Advertisement
Table of Contents
