RE 50140-R/05.05 1/12 Assembly and repair instructions Bladder-type accumulator, model HAB HAD 7254_04 Contents Contents Page Product list Possible damage, malfunctions and their causes 2 and 3 Initial startup Assembly and disassembly 4 to 6 Cleaning and testing Assembly of accumulator...
- Tighten sealing cap screw. - Periodically monitor preload pressure Use BOSCH REXROTH inflation and testing device to check inflation pressure at initial startup. Repeat this test during first week of operation, and thereafter every 6 months under normal operation or monthly if operation is intensive.
Page 4
4/12 Bosch Rexroth AG Bosch Rexroth AG Assembly and repair instructions RE 50140-R/05.05 Disassembly and assembly Fig. 1 Detach accumulator from system and de-pressurize with aid of accumulator safety block (drain tap) or hydraulic circuit. Dismantle accumulator and locate horizontally in vise or a suitable fastening system.
Page 5
Bosch Rexroth AG Bosch Rexroth AG 5/12 RE 50140-R/05.05 Assembly and repair instructions Disassembly and assembly Fig. 5 Undo fastening nut on gas valve and remove type label Fig. 6 Undo slotted round nut for hook wrench using hook wrench Fig.
Page 6
6/12 Bosch Rexroth AG Bosch Rexroth AG Assembly and repair instructions RE 50140-R/05.05 Disassembly and assembly Fig. 9 Remove sealing ring and washer Fig. 10 Remove retaining ring, take it out, by carefully pushing ring together Fig. 11 Remove oil valve from container Fig.
Bosch Rexroth AG Bosch Rexroth AG 7/12 RE 50140-R/05.05 Assembly and repair instructions Cleaning and testing − Clean all metallic parts on accumulator using an organic reducer. − Visual inspection of oil valve parts (valve tappet, spring, nut, damping screw).
Page 8
8/12 Bosch Rexroth AG Bosch Rexroth AG Assembly and repair instructions RE 50140-R/05.05 Assembly of accumulator Charge accumulator with medium. Up to 4l accumulator approx. 10 % of volume; for larger accumulators approx. 5% of volume. Lubricate bladder and carefully insert into housing. When inserting the housing do so at a slight angle;...
Page 9
Bosch Rexroth AG Bosch Rexroth AG 9/12 RE 50140-R/05.05 Assembly and repair instructions Assembly of accumulator Fig. 16 Screw on slotted nut and center the parts on the oil valve using a plastic hammer Fig. 17 Bleeder screw with sealing ring Fig.
10/12 Bosch Rexroth AG Bosch Rexroth AG Assembly and repair instructions RE 50140-R/05.05 Assembly of accumulator Without illustration: Dip new gas oil valve into oil and screw in. Before charging the accumulator with nitrogen, you must first rotate it through its axis so that the entire interior surface of the container is wetted.
Bosch Rexroth AG Bosch Rexroth AG 11/12 RE 50140-R/05.05 Assembly and repair instructions List of service parts and exploded view 1. Bladder 1. 1 with gas valve 1.2 and sealings for oil valve 1.3 Vol. [l] Nitril (NBR) 1 535 490 124...
Need help?
Do you have a question about the HAB and is the answer not in the manual?
Questions and answers