Chambers MVW206SS Installation And User Manual page 9

4. Fix the one-way-valve to the air outlet of the cooker hood. Then, attach the
exhaust pipe to the one-way-valve as shown below.
Exhaust pipe
Cooker hood
5. CHIMNEY INSTALLATION
1. Place the upper chimney into the lower chimney.
2. Use 2 pcs ST4x8mm screws to attach lower and upper chimney together. Before
attaching the bracket to the chimney, decide the location of lower chimney
bracket fixing holes for fixing the lower chimney bracket in the later steps.
3. Do not over tighten the screws
4. Make sure the upper chimney can be telescopically adjusted after assembly.
9