Chambers MVW206SS Installation And User Manual page 11

6. INSTALLATION (RECIRCULATING)
If you do not have exterior access, an exhaust pipe is not required. A recirculating kit
can be used to clean the air and trap odors.
1. To install the activated carbon filter, the grease filters should be removed
first. Press down the locking tab to remove the filters.
2. Attach the activated carbon filter to the air intake and turn it in clockwise
direction. Repeat the same on the other side.
NOTE:
* Make sure the filter is securely locked. Otherwise, it may become loose and cause damage
to the range hood.
11