Inspur NF5166M4 User Manual page 60

3.2.4.4.3 Change User Settings
Change User Settings interface is used to change the user's name, password and
other user settings.
Change User Settings Interface Instruction Table
Interface Parameters
User Name
User Password
User
Change User Password
Channel NO
User Privilege Limit
Specific operation steps:
a、Select the User Name option, press Enter, the User Name box will pop up,
manually enter the user name to modify, after configuration is completed,
press Enter to confirm.
b、Select the User Password option, press Enter, the User Password box will
pop up, manually enter the user password, and press Enter to confirm. If
the input password is correct, the gray option below User Password will
56
Function Description
The user name that needs to change
The user password that needs to change
User privilege on/off settings, option parameters:
Disabled
Enabled
Change user password
BMC channel settings, set to 1or 8
Change user privilege settings, option
parameters:
No Access
User
Operator
Administrator
Default
--
--
Disabled
--
0
No Access