4.4.3.2 Set the Network Information of BMC Management Port
Command function
Set the network information of BMC management port
Command format
Ipconfig –set <option><interface>
Parameter description
Parameter
Parameter
description
Option
Parameter
Interface
Network interface
For example:
4.4.3.3 Sensor Information Display
Command function
Display all the sensor information
Command format
Sensor –list
For example
4.4.3.4 FRU Information Acquisition
Command function
102
Value
● ipsrc
● Static: static IP address
● DHCP: obtain IP address dynamically
● ipaddr ipsrc: the set IP address when static is selected
● netmask ipsrc: the set Netmask when static is selected
● gateway ipsrc: the set gateway when static is selected
eth0/eth1/bond0