Hardware Maintenance; Tool Preparation; Parts Replacement - Inspur NF5166M4 User Manual

5 Hardware Maintenance

5.1 Tool Preparation

● Necessary tools are shown in the following table.
Tool List

5.2 Parts Replacement

Special tips: Except hot-swappable parts (i.e. hot-swappable disk drives), all part
replacements could only be carried out with power disconnected.
5.2.1 Processor Replacement
During installing and replacing CPU, please pay attention to the following issues:
● If installing two CPUs, type of these two CPUs shall be the same.
● When only one CPU is to be installed, please operate according to the following
requirements:
1) This CPU has to be installed on CPU0's socket, and see [Motherboard
Diagram] for CPU position.
Illustration Name
Phillips Screwdriver Used to fix bolts.
A n t i - s t a t i c W r i s t
Strap
Anti-static Gloves
Hardware Maintenance
Description
Used to contact or operate
devices and apparatus,
to prevent electrostatic
discharge.
Used to plug in single board,
hand-held single board or
other precision instruments,
to prevent electrostatic
discharge.
115