Gree GWH07AFA-K3NNA1A Service Manual page 83

Step
8. Remove motor and cross flow blade
a Remove 3 screws fixing motor clamp and
then remove the motor clamp.
Remove the at the connection place of
b
cross flow blade and motor; lift the motor
and cross flow blade upwards to remove
them.
9. Remove vertical louver
Loosen the connection clasps between
vertical louver and bottom case to remove
vertical louver.
80
Procedure
Screws
Cross flow
Clasps
Service Manual
Motor clasp
Motor
Clasps
Installation and Maintenance