Gree GWH07AFA-K3NNA1A Service Manual page 82

Service Manual
Step
7. Remove evaporator assy
a
Remove 3 screws fixing evaporator assy.
At the back of the unit, Loosen the
b
clasp,connection pipe clamp and then
remove the connection pipe clamp.
First remove the left side of evaporator from
c
the groove of bottom shell and then remove
the right side from the clasp on the bottom
shell.
Adjust the position of connection pipe
d
on evaporator slightly and then lift the
evaporator upwards to remove it.
Installation and Maintenance
Procedure
Connection pipe clamp
Clasp
Groove
Rear Case assy
Evaporator assy
Screws
Clasp
Connection pipe
79