Av3 Output; Pip Input - Sony FD Trinitron KV-28FQ70U Instruction Manual

Level 1
If you select "AUTO", the output signal will always be the same one that is displayed on
the screen.
If you have connected a decoder to the Scart
Scart, please remember to change back the "AV3 Output" to "AUTO" or "TV" for correct
unscrambling.
12
Menu System
Level 2 Level 3 / Function

AV3 OUTPUT

The "AV3 Output" option in the "Features"
menu allows you to select the source to be
output from the Scart connector
that you can record from this Scart any signal
coming from the TV or from an external
equipment connected to the Scart connectors
1/ 1 2/
or
4
connectors or
S
If your VCR supports SmartLink, this
procedure is not necessary.
To do this: after selecting the option, press
Then press or
output signal: TV, AV1, AV2, AV4, YC4 or
AUTO.
3 3
/ or to a VCR connected to this
S

PIP INPUT

The "PIP Input" option in the "Features" menu
allows you to select the source you want to
watch in the "PIP" screen.
To do this: after selecting the option, press
Then press repeatedly
desired source AV1, AV2, AV3, AV4 or TV.
Finally press OK to store.
To watch the "PIP" screen with the selected
source, press the button on the remote control.
You can swap the screens by pressing the
button on the remote control.
3
/
S
2
or front
4 4
and .
to select the desired
or to select the
continued...
3
so
.
.