Sony FD Trinitron KV-28FQ70U Instruction Manual page 8

4
The Auto Tuning menu appears on the screen. Press the
OK button to select Yes.
5
The TV starts to automatically search and store all
available broadcast channels for you.
This procedure could take some minutes. Please be
patient and do not press any buttons, otherwise
automatic tuning will not be completed.
In some countries the TV Broadcaster installs the
channels automatically (ACI system). In this case,
the TV Broadcaster sends a menu in which you can
select your city by pressing the
OK to store the channels.
If no channels were found during the auto tuning
process then a new menu appears automatically on
the screen asking you to connect the aerial. Please
connect the aerial (see page 6) and press OK. The
auto tuning process will start again.
6
After all available channels are captured and stored,
the Programme Sorting menu automatically appears
on the screen enabling you to change the order in
which the channels appear on the screen.
a)
If you wish to keep the broadcast channels in the
tuned order, go to step 7.
b)
If you wish to store the channels in a different order:
1 Press the
number with the channel (TV Broadcast) you wish
to rearrange, then press the
2 Press the
programme number position for your selected
channel (TV Broadcast), then press OK.
3 Repeat steps b)1 and b)2 if you wish to change
the order of the other channels.
7
Press the MENU button to remove the menu from the
screen.
Your TV is now ready for use
8
First Time Operation
or
or button to select the programme
button.
or button to select the new
button and
MENU