Av3 Output; Tv Speakers; Picture Rotation - Sony KV-32LS65AUS Instruction Manual

Level 1
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
If you select "AUTO", the output signal will always be the same one that is displayed on
the screen.
If you have connected a decoder directly to the Scart
to this Scart, please remember to change back the "AV3 Output" to "AUTO" or "TV" for
correct unscrambling. This is not necessary if you connect the decoder through the
supplied scart adaptor.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Level 2
Detail Set Up
Auto Format: On
Noise Reduction: Auto

AV3 Output:

TV

TV Speakers:

On

Picture Rotation:

0
PIP Input: AV1
PIP Position:
OK
Detail Set Up
Auto Format: On
Noise Reduction: Auto
AV3 Output: TV
TV Speakers: On
Picture Rotation: 0
PIP Input: AV1
PIP Position:
OK
Detail Set Up
Auto Format: On
Noise Reduction: Auto
AV3 Output: TV
TV Speakers: On
Picture Rotation: 0
PIP Input: AV1
PIP Position:
OK
Level 3 / Function
AV3 OUTPUT
The "AV3 Output" option in the "Detail Set
Up" menu allows you to select the source to be
output from the Scart connector
that you can record from this Scart any signal
coming from the TV or from an external
equipment connected to the Scart connectors
1/ 1 2/
or
4 4
or and
S
If you select AV1 or AV2 and you use the
supplied scart cable, it is necessary to
connect all 6 lines of it.
To do this: after selecting the option, press
Then press or to select the desired
output signal: TV, AV1, AV2, AV4, YC4 or
AUTO.
3 3
/
S
TV SPEAKERS
The "TV Speakers" option in the "Detail Set
Up" menu allows you to mute the TV speakers
in order to listen to the TV from an external
amplifier connected to the audio outputs on the
rear of the TV set.
To do this: after selecting the option, press
Then press or to select Off. Finally
press OK to confirm and store.
To cancel this function afterwards, select "On"
instead of "Off" in the step above.
PICTURE ROTATION
Because of the earth's magnetism, the picture
might slant. If this is the case, you can correct
the pictures slant by using the "Picture
Rotation" option in the "Detail Set Up" menu.
To do this: after selecting the option, press
Then press or to correct any slant of the
picture between -5 and +5.
3 3
/ so
S
2
or side connectors
4
.
or to a VCR connected
continued...
Menu System
.
EN
.
.
15