Table of Contents
Advertisement
3. Operation
Make sure you carefully follow the "Safety" and "Installation" instructions before operating
your monitor. You may also want to familiarize yourself with the "Image Adjustment" section of
this manual before making any operational adjustments.
3.1 To operate the monitor
1.
Turn on the monitor by pressing the power button once. The power LED lights up
and the monitor demagnetizes itself for about 4 seconds.
2.
Power up the system.
3.
Once the system is completely powered up, the LED power indicator on the monitor
should be green. If not, check the connections.
4.
Use On-Screen Display to adjust the controls needed to get the best picture.
Experiment with the display settings to choose the optimized image size and
position for you (refer to the Image Adjustment section of this manual for
Instructions).
A. Power button
B. LED power indicator
C. Function key
Note:If you need to disconnect the power cord from the wall socket or monitor for any
reason, be sure to wait at least 30 seconds after you turn off the monitor before you unplug
it. This allows the monitor to discharge any static electricity from the screen surface.
7
Advertisement
Table of Contents
