Philips 105S User Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 105S
  6. User manual
Philips 105S User Manual

Philips 105S User Manual

Philips 105s: user guide
Hide thumbs Also See for 105S:
Table of Contents

Advertisement

Quick Links

Philips 105S Electronic User's Manual
file:///C|/rita wu/gs3noVE/english/105S/Index.htm [11/3/2000 1:11:39 PM]

Advertisement

Table of Contents
loading

Related Manuals for Philips 105S

Summary of Contents for Philips 105S

  • Page 1 Philips 105S Electronic User's Manual file:///C|/rita wu/gs3noVE/english/105S/Index.htm [11/3/2000 1:11:39 PM]...

  • Page 2: Safety And Troubleshooting Information

    Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them and prevent proper cooling of the monitor's electronic devices. To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or excessive moisture.
  • Page 3 Other Documents You May Need About This Guide This electronic user's guide is intended for anyone who uses the Philips 105S Color Monitor. It describes the monitor's features, setup, operation and all other information, which is the same exact information described in our printed version.
  • Page 4 ©1999 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V. file:///C|/rita wu/gs3noVE/english/105S/about/about.htm (2 of 2) [11/3/2000 1:13:06 PM]...

  • Page 5: Product Information

    Product Features 105S20 15-inch (14.0" VIS) color monitor with excellent front of screen performance for use with MACs and Autoscan covers horizontal frequencies up to 63 kHz offering a maximum resolution of 1280 x 960 with flicker free display of 800 x 600 at up to 101 Hz Flat square CRT with high-resolution 0.28 mm dot pitch (0.24 hdp).

  • Page 6: White Color Temperature

    • at 9300 K degrees • at 6500 K degrees * These information are subject to change without notice. Automatic Power Saving file:///C|/rita wu/gs3noVE/english/105S/product/product.htm (2 of 4) [11/3/2000 1:13:07 PM] 15 inch / 36 cm ; 90° deflection angle 0.28 mm 0.24 mm...

  • Page 7: Energy Star

    105S Product Information If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or other input device is detected, the monitor will automatically "wake up". The following table shows the power...

  • Page 8: Front View

    Blue video ground Views Follow the links to see various views of the monitor and its components. Front View Rear View file:///C|/rita wu/gs3noVE/english/105S/product/product.htm (4 of 4) [11/3/2000 1:13:07 PM] Assignment No pin Logic ground Identical output - connected to pin 10 Serial data line (SDA) H.

  • Page 9: Installing Your Monitor

    Contrast hotkey. When the UP arrow is pressed, the adjustment controls for the CONTRAST will show up. UP and DOWN buttons are used when adjusting the OSD of your monitor file:///C|/rita wu/gs3noVE/english/105S/install/install.htm (1 of 3) [11/3/2000 1:13:08 PM] • PCUH411 USB Hub (option)

  • Page 10: Rear View

    BRIGHTNESS will show up. LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor. Rear View file:///C|/rita wu/gs3noVE/english/105S/install/install.htm (2 of 3) [11/3/2000 1:13:08 PM] RETURN TO TOP OF THE PAGE...
  • Page 11 Installing your Monitor Power in - attach power cable here. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC. file:///C|/rita wu/gs3noVE/english/105S/install/install.htm (3 of 3) [11/3/2000 1:13:08 PM]...

  • Page 12: On-Screen Display

    Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors directly though an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor.
  • Page 13 Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. file:///C|/rita wu/gs3noVE/english/105S/osd/osddesc.htm (2 of 4) [11/3/2000 1:13:10 PM] RETURN TO TOP OF THE PAGE...
  • Page 14 On-Screen Display file:///C|/rita wu/gs3noVE/english/105S/osd/osddesc.htm (3 of 4) [11/3/2000 1:13:10 PM]...
  • Page 15 On-Screen Display RETURN TO TOP OF THE PAGE file:///C|/rita wu/gs3noVE/english/105S/osd/osddesc.htm (4 of 4) [11/3/2000 1:13:10 PM]...

  • Page 16: Customer Care And Warranty

    Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland •...
  • Page 17 L M N O P Autoscan A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card. An autoscan monitor can thus operate with a wide range of video cards. MultiSync, a registered trademark of NEC, provides a similar function.

  • Page 18: Color Temperature

    A way of describing the color of a radiating source in terms of the temperature (in degrees Kelvin) of a black body radiating with the same dominant frequency as the source. Most Philips monitors offer the possibility of setting the color temperature to any desired value. Contrast The ratio between the brightness of the brightest and darkest parts of a picture.
  • Page 19 TV and monitor picture tube. CustoMax Philips proprietary monitor control software that allows users to control parameters (e.g., Size, Color, Geometry) using software running in Windows. CustoMax is compatible with existing VGA cards. See CrystalClear FAQ and USB Bay FAQ.

  • Page 20: Digital Control

    Plug & Play approach introduced into the PC market to increase user friendliness. The three levels developed for Plug & play are: (1) DDC1, monitor send data to the PC; (2) DDC2B, PC can request information from monitor; and (3) DDC2Bi which is a two-way communication - monitor can be addressed and PC or graphics board can give commands to monitor.
  • Page 21 MPR-II defines maximum permitted electrostatic, magnetic and electric field levels measured at a distance of 50 cm from the center of the monitor (see table). file:///C|/rita wu/gs3noVE/english/105S/glossary/glossary.htm (5 of 18) [11/3/2000 1:13:12 PM] RETURN TO TOP OF THE PAGE...
  • Page 22 The problem can, however, be eliminated by increasing the refresh rate (number of frames/second) of the monitor to a value above around 70 Hz. Sensitivity to flicker appears to diminish with increasing age.
  • Page 23 50 Hz means a picture (or frame) frequency of 50 Hz. At any given resolution, non-interlaced modes are preferable to interlaced modes; however, generation of non-interlaced modes is more expensive. file:///C|/rita wu/gs3noVE/english/105S/glossary/glossary.htm (7 of 18) [11/3/2000 1:13:12 PM] RETURN TO TOP OF THE PAGE...

  • Page 24: Line Frequency

    Alternating fields generated by the deflection yoke. These are subject to increasing attention, notably by governing authorities, the trade and the press. Although there is no scientific evidence that monitor emissions are harmful, much effort has gone into reducing emissions on the principle of better safe than sorry.
  • Page 25 A fringe pattern arising from the interference between two superimposed line patterns. In a monitor it comes from the interference between the shadow mask pattern and the video information (video moiré), and between the shadow mask pattern and the horizontal line pattern (scan moiré). It shows itself as wavy patterns on the screen and becomes more noticeable as monitor resolution increases.
  • Page 26 Abbreviation for picture element, the smallest element of the picture that can be displayed on the screen. The smaller the pixel size, the better the resolution of the monitor. Pixel size is determined by the size of the electron spot on the screen and not necessarily by the phosphor dot pitch (the size of the triad). Thus, a monitor with a large electron spot covering several triads can exhibit poor resolution even though its dot pitch is small.

  • Page 27: Refresh Rate

    Rotation function The feature that allows users to adjust the whole screen rotating to be horizontal. Because of the magnetic field of earth, the screen of monitor will be tilt when the screen faces toward the different direction. Screen coatings file:///C|/rita wu/gs3noVE/english/105S/glossary/glossary.htm (11 of 18) [11/3/2000 1:13:12 PM]...
  • Page 28 Glossary Anti-Static coatings Due to bombardment by beam electrons, monitor screens become electrically charged when in use. Electrically charged screens surfaces can attract dust particles. An Anti-Static coating is a conductive coating deposited on the screen (or on a glass panel immediately in front of the screen) that conducts away the charge and prevents screen dust build-up.

  • Page 29: Self-Test Function

    Self-test function A monitor equipped with hardware or software to automatically detect cable connection status. Shape Deviation of a reproduced picture from its intended shape. The following types of distortion are most common: file:///C|/rita wu/gs3noVE/english/105S/glossary/glossary.htm (13 of 18) [11/3/2000 1:13:12 PM]...

  • Page 30: Tilt Function

    A properly functioning color monitor requires five kinds of signals: horizontal sync pulse, vertical sync pulse, red color signal, green color signal and blue color signal. Signals from a PC are transmitted to a monitor using one of three methods: 1.
  • Page 31 A TTL-driven monitor can thus display a maximum of 64 colors. Video standards such as MDA, CGA and EGA are based on TTL level.
  • Page 32 It also has hardware support for reset and suspend/resume signaling. The controller provides the interface registers to allow communication to/from the host. Hub specific status and control commands permit the host to configure a hub and to monitor and control its ports.
  • Page 33 A card equipped with a character or graphic generator and video memory, which maps to the screen. A microprocessor scans video memory and translates bit information from the computer into displayable video signals for the monitor. These cards comply with various standards that determine the nature and quality of the display.
  • Page 34 The real screen dimensions that users can see measured diagonally. The VIS of a monitor is always less than the so called screen size of a monitor. For example, the VIS of a 17-inch monitor is only about 16 inches. It depends on the useful screen size of CRT and the opening of a monitor's front cabinet.

  • Page 35: Download And Print

    'source', choose 'source'). Printing instructions: To print the manual: 1. With the manual file open, follow your printer's instructions and print the pages you need. 104S.pdf 105E.pdf 105S.pdf 107E.pdf 109P.pdf file:///C|/rita wu/gs3noVE/english/download/download.htm [11/3/2000 1:13:12 PM] Mac. English language manual Adobe®...

  • Page 36: Troubleshooting

    No color or intermittent color Color appears blotchy Missing one or more colors file:///C|/rita wu/gs3noVE/english/105S/safety/saf_troub.htm (1 of 2) [11/3/2000 1:13:37 PM] • Troubleshooting • Regulatory Information Check these items Make sure the Power cable is plugged into the power outlet and back of the monitor.
  • Page 37 Problem with On Screen Display For further assistance, refer to the distributor. file:///C|/rita wu/gs3noVE/english/105S/safety/saf_troub.htm (2 of 2) [11/3/2000 1:13:37 PM] Adjust the Brightness and Contrast controls. Check your video card and it's owner's manual instructions for it may be a non-VESA-DDC Standard card.

  • Page 38: Regulatory Information

    Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy. What does labeling involve? file:///C|/rita wu/gs3noVE/english/105S/safety/regs/regulat.htm (1 of 11) [11/3/2000 1:13:39 PM] • TCO Environmental Requirements •...

  • Page 39: Environmental Requirements

    The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. file:///C|/rita wu/gs3noVE/english/105S/safety/regs/regulat.htm (2 of 11) [11/3/2000 1:13:39 PM] RETURN TO TOP OF THE PAGE...
  • Page 40 ** Lead, Cadmium and Mercury are heavy metals which are bio-accumulative. Energy Star Declaration This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS to fulfill the requirements in the NUTEK specification 803299/94.

  • Page 41: Federal Communications Commission (Fcc) Notice (U.s. Only)

    NERGY NERGY We recommend you switch off the monitor when it is not in use for quite a long time. Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 42: Commission Federale De La Communication (Fcc Declaration)

    CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. EN 55022 Compliance (Czech Republic Only) file:///C|/rita wu/gs3noVE/english/105S/safety/regs/regulat.htm (5 of 11) [11/3/2000 1:13:39 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 43: Vcci Notice (Japan Only)

    Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas. file:///C|/rita wu/gs3noVE/english/105S/safety/regs/regulat.htm (6 of 11) [11/3/2000 1:13:39 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 44: Polish Center For Testing And Certification Notice

    Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
  • Page 45 NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. BSMI Notice (Taiwan Only) file:///C|/rita wu/gs3noVE/english/105S/safety/regs/regulat.htm (8 of 11) [11/3/2000 1:13:39 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 46: Warning! This Appliance Must Be Earthed

    Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer.
  • Page 47 Regulatory Information file:///C|/rita wu/gs3noVE/english/105S/safety/regs/regulat.htm (10 of 11) [11/3/2000 1:13:39 PM] moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A.
  • Page 48 Regulatory Information file:///C|/rita wu/gs3noVE/english/105S/safety/regs/regulat.htm (11 of 11) [11/3/2000 1:13:39 PM] that the cord grip is clamped over the sheath of the lead - not simply over the three wires. RETURN TO TOP OF THE PAGE...

  • Page 49: Other Related Information

    Use a Cord Set rated minimum 5 A, 250 V ( for units set at 230V ) or 10A, 125V (for units set at 115V). The Cord Set should have the appropriate safety approvals for the country in which the equipment will be installed. file:///C|/rita wu/gs3noVE/english/105S/safety/saf_other.htm [11/3/2000 1:13:40 PM] • Troubleshooting •...
  • Page 50 • Microphone in/out • Includes • Dimension • Power consumption Description of the Controls file:///C|/rita wu/gs3noVE/english/105S/install/mm_pede/mm_inst.htm (1 of 3) [11/3/2000 1:14:33 PM] • Description of the Controls 2 x 1.5W RMS / 36W PMPO 3.5 mm jack 3.5 mm jack Audio cable and AC adapter 9.4"...
  • Page 51 6B3G11 Multimedia Base (option) Installing your Multimedia Pedestal file:///C|/rita wu/gs3noVE/english/105S/install/mm_pede/mm_inst.htm (2 of 3) [11/3/2000 1:14:33 PM] Attach your microphone here. Connect this to the audio output of your PC. Connect this to the microphone output of your PC. Connect power input here.
  • Page 52 6B3G11 Multimedia Base (option) file:///C|/rita wu/gs3noVE/english/105S/install/mm_pede/mm_inst.htm (3 of 3) [11/3/2000 1:14:33 PM] 2. To UN-INSTALL Lift the back hook from the hole on the bottom plate of your monitor. Slide out the pedestal the opposite direction (from when you installed it).
  • Page 53 Front View • Rear View • Installing your USB Hub Installing your USB Hub file:///C|/rita wu/gs3noVE/english/105S/install/usbhub/usb_inst.htm (1 of 2) [11/3/2000 1:14:34 PM] Installing on a conventional base. Take out the USB hub from the box. Take off the USB hub cover.
  • Page 54 USB Hub (Optional Feature) file:///C|/rita wu/gs3noVE/english/105S/install/usbhub/usb_inst.htm (2 of 2) [11/3/2000 1:14:34 PM] RETURN TO TOP OF THE PAGE Position the USB hub to the back of the Multimedia Pedestal. Attach the USB hub by sliding-in to the Multimedia base.
  • Page 55 CONTRAST To adjust your screen's contrast, follow the steps bellow. Contrast is the difference between the light and dark areas on the screen. A 100% contrast is recommended. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (1 of 25) [11/3/2000 1:15:13 PM] • The OSD Tree •...
  • Page 56 The MAIN CONTROLS window appears. LANGUAGE should be highlighted. 2) Press the button again. The LANGUAGE window appears. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (2 of 25) [11/3/2000 1:15:13 PM] RETURN TO TOP OF THE PAGE button and after three...
  • Page 57 . . . to continue to INPUT SIGNAL SELECTION, press the Smart SIGNAL SELECTION is highlighted. Next, follow steps 3 - 5 under INPUT SIGNAL Help SELECTION..to exit completely, press the file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (3 of 25) [11/3/2000 1:15:13 PM] button until INPUT button...

  • Page 58: Input Signal Selection

    INPUT B or INPUT A. 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (4 of 25) [11/3/2000 1:15:13 PM] RETURN TO TOP OF THE PAGE (Not available in all models)
  • Page 59 The MAIN CONTROLS window appears. 2) Press the button until ZOOM is highlighted. 3) Press the button. The ZOOM window appears. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (5 of 25) [11/3/2000 1:15:13 PM] button until ZOOM is highlighted. Next, follow button RETURN TO TOP OF THE PAGE...
  • Page 60 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST HORIZONTAL is highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (6 of 25) [11/3/2000 1:15:13 PM] button RETURN TO TOP OF THE PAGE button until ADJUST...
  • Page 61 5) When the position is adjusted, press the to highlight ADJUST SIZE. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (7 of 25) [11/3/2000 1:15:13 PM] button to return to MAIN CONTROLS window, or press the...
  • Page 62 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST VERTICAL is highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (8 of 25) [11/3/2000 1:15:13 PM] button. button to return to MAIN CONTROLS window. CLOSE MAIN button...
  • Page 63 4) Press the button to move the image up or down. 5) When the position is adjusted, press the to highlight ADJUST SIZE. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (9 of 25) [11/3/2000 1:15:13 PM] button to return to MAIN CONTROLS window, or press the...
  • Page 64 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST SHAPE is highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (10 of 25) [11/3/2000 1:15:13 PM] button. button to return to MAIN CONTROLS window. CLOSE MAIN button...
  • Page 65 105S The OSD Controls 3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. 4) Press the button. The SIDE CURVE window appears. PINCUSHION should be highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (11 of 25) [11/3/2000 1:15:13 PM]...
  • Page 66 BACK TO MAIN WINDOWS will be highlighted. 9) Press the button to return to the MAIN CONTROLS window, or press the SIDE ANGLES is highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (12 of 25) [11/3/2000 1:15:13 PM] button. button to highlight BALANCED or press the button.
  • Page 67 The MAIN CONTROLS window appears. 2) Press the button until ADJUST SHAPE is highlighted. 3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (13 of 25) [11/3/2000 1:15:13 PM] button twice.
  • Page 68 The SIDE ANGLES window appears. TRAPEZOID should be highlighted. 6) To adjust the trapezoid, press the 7) When the trapezoid is adjusted, press the button to return to the ADJUST SHAPE window. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (14 of 25) [11/3/2000 1:15:13 PM] button. button to highlight PARALLELOGRAM or press the...
  • Page 69 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST SHAPE is highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (15 of 25) [11/3/2000 1:15:13 PM] button. button to return to the ADJUST SHAPE window. button twice.
  • Page 70 The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. 4) Press the arrow until ROTATE IMAGE is highlighted. 5) Press the button. The ROTATE IMAGE window appears. ROTATE should be highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (16 of 25) [11/3/2000 1:15:13 PM]...

  • Page 71: Adjust Color

    ...to exit completely, press the ADJUST COLOR Your monitor has two preset options you can choose from. The first option is for GENERAL USE, which is fine for most applications. The second option is for GAMES, which is for playing computer games. When you select one of these options, the monitor automatically adjusts itself to that option.
  • Page 72 9300K for GENERAL USE, 6500K for GAMES, or USER PRESET. 5) Once you have highlighted GENERAL USE or GAMES, press the and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (18 of 25) [11/3/2000 1:15:13 PM] button to confirm you selection...

  • Page 73: Reset To Factory Settings

    TO FACTORY SETTINGS..to exit completely, press the RESET TO FACTORY SETTINGS file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (19 of 25) [11/3/2000 1:15:13 PM] button to highlight RED. Next, press the LEFT button to highlight GREEN. Next, press the button to highlight BLUE. Next, press the button to confirm your adjustments and return to button.
  • Page 74 YES or NO. NO is the default. YES returns all settings to their original factory adjustments. 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (20 of 25) [11/3/2000 1:15:13 PM]...
  • Page 75 2) Press the button until EXTRA CONTROLS is highlighted. 3) Press the button. The EXTRA CONTROLS window appears. DEGAUSS will be highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (21 of 25) [11/3/2000 1:15:13 PM] button. RETURN TO TOP OF THE PAGE button until EXTRA...
  • Page 76 The MAIN CONTROLS window appears. 2) Press the DOWN CURSOR button until EXTRA CONTROLS is highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (22 of 25) [11/3/2000 1:15:13 PM] button. Your screen will be degaussed, then the MAIN button until EXTRA CONTROLS is...
  • Page 77 The EXTRA CONTROLS window appears. DEGAUSS will be highlighted. 4) Press the button until ADJUST MOIRE is highlighted. 5) Press the button. The ADJUST MOIRE window appears. HORIZONTAL will be highlighted. file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (23 of 25) [11/3/2000 1:15:13 PM]...
  • Page 78 After returning to MAIN CONTROLS . . . Smart . . . to exit completely, press the Help file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (24 of 25) [11/3/2000 1:15:13 PM] button. button to highlight VERTICAL. button. button to return to the EXTRA CONTROLS window.
  • Page 79 105S The OSD Controls CLOSE MAIN CONTROLS RETURN TO TOP OF THE PAGE file:///C|/rita wu/gs3noVE/english/105S/osd/osd_cont.htm (25 of 25) [11/3/2000 1:15:13 PM]...
  • Page 80 Just a phone call away Philips’ customer help desks are located worldwide. You can contact Philips Monday - Friday from 08.00 - 20.00 hrs Central European Time (CET) and on Saturdays and Sundays from 10.00 to 18.00 hrs CET by using one of the toll-free numbers.

  • Page 81: Your International Guarantee

    12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer.

  • Page 82: Limited Warranty

    Philips Consumer Electronics. reception problems caused by signal conditions or cable or antenna systems outside the unit.
  • Page 83 Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose.
  • Page 84 Just a phone call away Philips’ customer help desks are located worldwide. You can contact Philips Monday - Friday from 08.00 - 20.00 hrs Central European Time (CET) and on Saturdays and Sundays from 10.00 to 18.00 hrs CET by using one of the toll-free numbers.

This manual is also suitable for:

105s21105s21/74105s20105s26

Table of Contents