PICTURE ADJUST menu
For those display with analog inputs, BACKLIGHT,
CONTRAST, and BRIGHTNESS can be adjustable when the
ECO mode is selected for the USER only.
Press the M button Press the m button
Set the ECO mode.
Select the brightness of your display from
"HIGH," "MIDDLE," "LOW," or "USER"
to save power consumption.
You can adjust the subtle tones of your
display brightness when selecting the
You can set a variety of mode by setting an
BACKLIGHT Brightens the screen. Darkens the screen.
Sharpens the picture
8 BRIGHTNESS Brightens the picture
You can adjust your pictures on the screen
to the original coloring.
If you select "sRGB," you cannot adjust CONTRAST, BRIGHTNESS,
When you select "sRGB" the color are
adjusted to the sRGB profile. (The sRGB
color setting is an industry-standard
color space protocol designed for
computer products.) When you select
"sRGB," the color settings of your
computer must be set to the sRGB
You can adjust color temperature finely
and that color setting is stored in
If a computer or other equipment connected to the display is not sRGB-
compliant, color cannot be adjusted to the sRGB profile.
When you select "sRGB," you cannot adjust CONTRAST,
BRIGHTNESS, and GAMMA.
sRGB is unavailable when HIGH or MIDDLE or LOW mode for ECO
mode is selected. ("sRGB" would be gray-out)
This adjustment changes the color temperature by increasing or
decreasing the R and B components with respect to G (green). G
component is fixed.
Press the m/M buttons
Adjust to sharpen the edge of images,
Blurs the picture
Darkens the picture
0 MODE RESET menu (PICTURE
ADJUST menu only)
You can reset the adjustments of
BRIGHTNESS, GAMMA, COLOR, and
SHARPNESS to the default setting.
To cancel resetting and return to the
SCREEN menu (analog RGB
x Automatic picture quality adjustment
When the display receives an input signal, it
automatically adjusts the picture's position and
sharpness (phase/pitch), and ensures that a clear
picture appears on the screen (page 17).
While the automatic picture quality adjustment function is activated, only
the 1 (power) switch is operable.
The picture may flicker during this time, but this is not a malfunction.
Simply wait a few moments until the adjustment completes.
If the automatic picture quality adjustment function of
this display did not seem to adjust the picture
You can make further automatic adjustment of the picture quality
for the current input signal. (See AUTO below.)
If you still need to make further adjustments to the
You can manually adjust the picture's sharpness (phase/pitch) and
position (horizontal/vertical position).
These adjustments are stored in memory and automatically
recalled when the display receives the same input signal. These
settings may have to be repeated if you change the input signal
after reconnecting your computer.
Make the appropriate adjustments of the
screen's phase, pitch and horizontal/
vertical position for the current input
signal and store them.
x Adjust the picture's sharpness and position
manually (PHASE/PITCH/H CENTER/V
You can adjust the picture's sharpness and position as follows.
Set the resolution to 1280 × 1024, on the computer.
Load the CD-ROM.
Start the CD-ROM, and display the test pattern.