Changing The Password - Sony Glasstron PLM-S700E Operating Instructions Manual

Setting the password (continued)
3
Verify a password using the jog dial.
If the password is correct, select YES by
turning the jog dial. If not, select NO.
Then press the jog dial.
If you select NO, return to step 1.
If you select YES, go to step 4 in "Using
the Glasstron" (page 30).

Changing the password

When the power is on, press RESET on the
bottom of the power supply box with a
pointed object such as a ballpoint pen.
• If you have already read the WARNING
messages (page 22 through 26) (e.g.,
while watching a video picture), the
display will return to step 1 in "Setting
the password" (page 27).
• Before you read the WARNING message
(e.g., you have forgotten your password),
the display will return to step 3 in
"Turning on the Glasstron" (page 22).
If you need to set a password after having
set the Glasstron to operate without a
password, follow the same procedure
above.
Note
Pressing the RESET button does not affect
picture or sound adjustments in PC and video
mode.
28
-GB
PUSH DISPLAY
RESET
IS YOUR PASSWORD
CORRECT?
123
YES
NO
SEL EXEC