Sony Glasstron PLM-S700E Operating Instructions Manual page 16

Connecting the Glasstron (continued)
Connecting a Macintosh (desktop models)
Depending on the model, you may need to use the supplied Macintosh adapter to connect the
RGB signal cable (supplied) as shown below. When you connect the Glasstron to your
Macintosh, set the PC-VIDEO switch on the power supply box to "PC."
to monitor port
of Macintosh
to monitor port
Macintosh
adapter
Notes on connection
• The supplied display adapter does not support the models before the Macintosh II series.
• Set the display setting to the 16-inch display mode (832 624) or the 13-inch display mode (640 480).
The Glasstron does not display the image with the 19-inch display mode (1024 768) or more.
16
-GB
?
(D-Sub 15-pin,
to monitor
male)
port
to audio port
Audio cable (supplied)
RGB signal cable (supplied)
: Signal flow
VGA type connector
(HD15, female)
Set the PC-VIDEO switch
to "PC."
PC
AUDIO
to PC AUDIO
connector
/
to RGB signal cable
Power supply box
RGB
to RGB connector