Sony LMD-2050W Operating Instructions Manual page 23

For the video input
USER CONTROL 1/3
AU T O C H R O M A / P H A S E
AU T O A D J VA L U E :
S TA R T :
USER CONTROL 2/3
S U B C O N T R O L
C O N T R A S T :
B R I G H T N E S S :
C H R O M A :
P H A S E :
A P E R T U R E :
B A C K L I G H T :
USER CONTROL 3/3
P I C T U R E C O N T R O L
A C C :
C T I :
V S H A R P N E S S :
I N P U T S E T T I N G
S H I F T H :
S H I F T V :
Submenu Setting
AUTO CHROMA/ Adjusts color intensity (CHROMA)
PHASE and tones (PHASE).
• AUTO ADJ VALUE: Selects
• START: The auto adjustment
xx
x
x
x
x
x
x
xx
x
x
xxx
xx
ON or OFF of the auto
adjustment. When you set
to OFF, this parameter is
reset to the factory setting.
When you set to ON, the
automatically adjusted value
is enabled.
starts when you display the
color bar signals (Full/
SMPTE/EIA) on the screen
and press the ENTER
button. After adjusting the
color intensity, press the
MENU button to clear the
adjustment screen. After the
adjustment is done correctly,
the AUTO ADJ VALUE is
automatically set to ON.
Submenu Setting
SUB CONTROL Adjusts finely the adjustment range
of the button on the front panel for
CONTRAST, BRIGHTNESS,
CHROMA and PHASE.
• CONTRAST: Adjusts the picture
• BRIGHTNESS: Adjusts the
• CHROMA: Adjusts color
• PHASE: Adjusts color tones.
• APERTURE: Adjusts the picture
• BACKLIGHT: Adjusts the
For details of input signals and
adjustable/setting items, see
page 10.
PICTURE CONTROL Adjusts the picture.
• ACC (Auto Color Control): Sets
• CTI (Chroma Transient
• V SHARPNESS: A crisp image
INPUT SETTING • SHIFT H: Adjusts the position of
• SHIFT V: Adjusts the position of
contrast.
picture brightness.
intensity. The higher the
setting, the greater the
intensity. The lower the
setting, the lower the
intensity.
The higher the setting, the
more greenish the picture.
The lower the setting, the
more purplish the picture.
sharpness.
The higher the setting, the
sharper the picture. The
lower the setting, the softer
the picture.
backlight. When the setting
is changed, the brightness of
the backlight is changed.
ACC circuit on or off.
To check the fine
adjustment, select OFF.
Normally select ON.
Improvement): When a low
color resolution signal is
input, a crisp image can be
displayed. When the setting
is higher, the picture
becomes even more crisp.
can be displayed. When the
setting is higher, the picture
becomes even more crisp.
the picture. As the setting
increases, the picture moves
to the right, and as the
setting decreases, the picture
moves to the left.
the picture. As the setting
increases, the picture moves
up, and as the setting
decreases, the picture moves
down.
23
Adjustment Using the Menus