Adjustments - Sony CPD-G410R Marketing Operating Instructions Manual

Adjustments

Navigating the menu
1
Press the MENU button to display the main menu.
,
The horizontal frequencies/resolution
of the current input signal (only if the
signal matches to one of this monitor's
factory preset modes)
2
Move the control button m/M to highlight the main
menu you want to adjust and press the control button.
,
3
Move the control button m/M to highlight the sub menu
you want to adjust. Then move the control button –/+
to make adjustments.
To close the menu
Press MENU button twice to return to the main menu. The default-
selected item is . Each time you select
button, the menu exits. If no buttons are pressed, the menu closes
automatically after about 30 seconds.
4
EX I T
45
1 2 8 0 x 1 0 2 4 / 8 5 H z
Main Sub
menu menu
The vertical
frequencies
of the current
input signal
S Z E I / CENTER
,
45
1 2 8 0 x 1 0 2 4 / 8 5 H z
Main Sub
menu menu
and press MENU
Adjusting the brightness and contrast
Brightness and contrast adjustments are made using a separate
BRIGHT/CONTRAST menu. These adjustments are effective for
all input signals.
1
Move the control button M (
BRIGHT/CONTRAST menu.
2
Move the control button m/M to select the brightness
( ) or contrast ( ). Then move the control button –/+
to make adjustments.
BR GHT I
1 2 8 0 x 1 0 2 4 / 8 5 H z
Note
If you selected the sRGB mode in the
(COLOR) menu, the / (BRIGHT/CONTRAST) menu for the sRGB
mode appears and you cannot adjust the brightness nor the contrast on this
screen. For more information about using the sRGB mode, see sRGB mode
in the (COLOR) menu.
)/m ( ) to display the
/ CONTRAST
BR I GHTNESS
45
(COLOR MODE) of the