9. When prompted to select the the manufacturer and model of the Modem,
click OK, then Next in the following window. The driver software
is installed.
Note: To verify Windows has found the Modem, select
Start, Settings, Control Panel, then Modems.
If dialing into a Windows NT Remote Access Server, or connecting to the
Internet, Dial-Up Networking must be configured properly. See the Windows NT.
documentation for details.
Next, go to chapter 5, "Installing the Communications Software."
Windows 2000
To load the Modem's software drivers onto a computer running Windows 2000:
1. Insert the Modem into the computer's PCMCIA slot.
2. Turn on the computer.
3. A "Found New Hardware" window appears, stating that Windows has
found a "Standard PCMCIA Card Modem."
4. Right-click My Computer, then select Properties from the pop-up menu.
5. In the "System Properties" window, select Hardware, then Device Manager.
6. When the "Device Manager" window appears, expand the "Modems"
section by clicking on the plus sign ("+").
DataLink V.90 PCMCIA Fax Modem
23