Nevco MPCX 1500 Operator Instructions Manual page 20

Security
(+)On (-)Off
The Security setting is used to allow multiple controls to
simultaneously operate the scoreboard.
With the Security set to (+)ON, the scoreboard will
ignore all other controls and can be operated only by the
control that turned it ON. When this control is turned
OFF another control can be used to turn the scoreboard
ON. Should the batteries go dead or the 1
the area – Power must be cycled to the scoreboard to
allow another control to operate the scoreboard.
If the Security is set to (-)OFF, multiple controls can be
used to operate the same scoreboard or scoreboard
system. This allows one person to operate part of the
scoreboard, such as the clock, while someone else
operates the rest of the scoreboard with another control.
Allow each control to establish communications with its
receiver(s) (Greeting screen disappears) before powering
ON the next control.
Note: Set the Security of ALL controls used in a multi-
control system to (-)OFF.
Note: When using a pitch count display with a baseball
scoreboard the baseball control must be turned on first.
The clear function on the baseball control will clear both
displays.
Note: All controls need to be configured for the
appropriate scoreboard model group and linked to the
same receiver(s).
Note: The control display will only update when keys
are pressed.
Note: Make sure all controls of a multi-control
scoreboard system are powered OFF before starting the
system. Power ON the system receivers, then, power
ON the control that will determine the scoreboard
attributes (Brightness Level etc.). Next; power ON the
remaining controls. Please allow time for each control to
complete its powering ON process (main screen appears)
before turning ON another control.
16
st
control leave