Ball, Strike Out Screen - Nevco MPCX 1500 Operator Instructions Manual

Balls:1 Outs:0
Strikes:0
Each press of this key increases the Ball count by 1.
Once selected, you can also use the "+" or "-" keys to change the
BALL
data.
Note: Press and hold the BALL key to reset the Balls and Strikes.
Each press of this key increases the Strike count by 1.
Once selected, you can also use the "+" or "-" keys to change the
STRIKE
data.
Note: Press and hold the STRIKE key to reset the Balls and Strikes.
Each press of this key increases the Out count by 1.
Once selected, you can also use the "+" or "-" keys to change the
OUT
data.
Note: Press and hold the OUT key to reset the Balls, Strikes, and
Outs.

BALL, STRIKE OUT screen

BALL, STRIKE, OUT
This screen shows the Balls, Strikes, and Outs. It appears
when a BALL, STRIKE, or OUT key is pressed. Press and
release one of these keys to add one to its count. If you press
and hold BALL or STRIKE, the Balls and Strikes will be reset
(cleared). Pressing and holding OUT will reset (clear) the Balls,
Strikes, and Outs.
10
Accessed
by
pressing
BALL
STRIKE
OUT
Balls:1 Outs:0
Strikes:0
Balls:0 Outs:0
Strikes:1
Balls:0 Outs:1
Strikes:0