NEC Multisync Plus JC-1501VMA Service Manual page 12

CONNECTING THE MULTISVNC PLUS
1. WITH YOUR COMPUTER OR GRAPHICS ADAPTER
To connect the MultiSync PLUS with your computer or graphics adapter, refer
to the diagram below.
Check input terminal pin assignment
BNC
9-pin D-Sub
Select BNC
Check input signal level
1.0Vp-p
Select D-sub
Check videQ signal level
ANALOG Video
TTL Video
O.7Vp-p
Corinect the power cord to the MultiSync PLUS and signal
cable between the MultiSync PLUS and your computer or
graphics adapter
Turn on ttie MultiSync PLUS POWER SWITCH
Turn on the power to computer
-11-
See APPENDIX A
See APPENDIX A
See rear controls
8
COLOR SWITCH
See front controls
.. INPUT SWITCH