Nibe F1155 Installer Manual page 66

choose another file
Select "choose another file" if you do not want to use
the suggested software. When you scroll through the
files, information about the marked software is shown
in a fact box just as before. When you have selected a
file with the OK button you will return to the previous
page (menu 7.1) where you can choose to start the
update.
Menu 7.2 - logging
Setting range: 1 s – 60 min
Default setting range: 5 s
Set whether the present measurement values from
F1155 are to be saved in a log on the USB memory.
Log for longer periods
1. Set the desired interval between loggings.
2. Tick "activated".
3. The present values from F1155 are saved in a file
in the USB memory at the set interval until "activ-
ated" is unticked.
Caution
Untick "activated" before removing the USB
memory.
64 Chapter 9 | Service
Menu 7.3 - manage settings
Here you can manage (save as or retrieve from) all the
menu settings (user and service menus) in F1155 with
a USB memory.
Via "save settings" you save the menu settings to the
USB memory in order to restore them later or to copy
the settings to another F1155.
NOTE
When you save the menu settings to the USB
memory you replace any previously saved set-
tings on the USB memory.
Via "recover settings" you reset all menu settings from
the USB memory.
NOTE
Reset of the menu settings from the USB
memory cannot be undone.
NIBE™ F1155