System - Pacific Sun Kore 7th User Manual

5.12. System

Doser management group box
Default settings
Clean memory
Soft reset
Emergency
connect
Memory backup
Restore backup
Calibration backup Generate file with pump calibration config.
Restore calibration Allow import calibration backup file to doser memory.
Sensor check
Program doser with default settings. We suggest use this button if
your doser after firmware upgrade not work properly.
Erase doser memory. Should be only performed after Pacific Sun
Service request.
Generate reset signal for doser.
Should be performed if software can't connect with doser due
firmware incompatibility. After connection firmware update (with
proper corresponding to software firmware) should be performed.
Generate .mbf file(memory backup file). This file can be send to
our service for diagnose (if something not work properly).
Allow import .mbf file to doser memory.
When enabled (check-box) on LCD screen show floating level
sensor status. Can be used for diagnose proper switch connection/
readings.
Page 51
Kore 7th Manual / kHLab Edition