Ato / Temp Config - Pacific Sun Kore 7th User Manual

5.7. ATO / Temp config

DC pump group box
Refill time (in seconds)
Manual turn on/off
Short beep after proper refill Enabling this option will cause a beep after each refill
Sound alarm
Choose alarm type
Test alarm
Reset ATO alarm
Temperature group box
Reset High/Low temp
Temperature alarm
Time in seconds defining how long the DC pump will
work when water low level sensor is activated. After
four unsuccessful attempts the pump will be turned
off (to prevent damage). It's highly advised to select
„Unsuccessful water refill Alarm check-box so you can
be notified upon failure.
Allows selecting the flow rate manually (flow adjust in
40-100% range).
of water.
Turn on/off sound alarm when high level sensor is
activated.
Allows you to select sound signal generated by the
doser.
Test sound alarm
Allows resetting the ATO after four unsuccessful refills.
Erase highest/lowest temperature record from doser
memory.
Turn on/off sound alarm for temperature settings
Page 45
Kore 7th Manual / kHLab Edition