Selecting Silent Mode; Setting The Beeps - Sagem myX-1 User Manual

251873962_myX-1a Twin_lu_en.book Page 56 Vendredi, 7. janvier 2005 3:00 15
Ringing tones

Selecting silent mode

(Depending on model)
If you want the ringing tone of your phone to be replaced by the vibrator and
Silent mode is automatically
the beeps to be suppressed (except for the alarm tone), tick the box and
deactivated when the hands free
validate by pressing OK.
car kit is connected as well as when
You can also activate/deactivate the silent mode by holding down the
the phone is switched on/off.
∗
key.
This mode is indicated by the symbol

Setting the beeps

Different controls are available:
You can select the tones produced
Setting the keypad tones
by your keypad: Beep, DTMF
(musical keys) or non active tones
Select the tone required using the scrolling arrows and validate (press the
(in this last case, when you press
righthand key
your keyboard, it does not make a
Setting the network tone
noise).
If you want your phone to give a warning beep when it locates a network on
which it can communicate:
Tick the box and validate by pressing OK.
Setting the low battery tone
If you want your phone to give a warning beep when your battery is low:
Tick the box and validate by pressing OK.
56
on the screen.
).