thomann Varytec LED Accu Pad 7 7x10W RGBAWUV User Manual
  1. Manuals
  2. Brands
  3. thomann Manuals
  4. DJ Equipment
  5. Varytec LED Accu Pad 7 7x10W RGBAWUV
  6. User manual
thomann Varytec LED Accu Pad 7 7x10W RGBAWUV User Manual

thomann Varytec LED Accu Pad 7 7x10W RGBAWUV User Manual

Battery spot light
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LED Accu Pad 7
7x10W RGBAWUV
battery spot light

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Varytec LED Accu Pad 7 7x10W RGBAWUV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for thomann Varytec LED Accu Pad 7 7x10W RGBAWUV

Summary of Contents for thomann Varytec LED Accu Pad 7 7x10W RGBAWUV

  • Page 1 LED Accu Pad 7 7x10W RGBAWUV battery spot light...
  • Page 2 Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 29.04.2019, ID: 390731 (V3)

  • Page 3: Table Of Contents

    Table of contents Table of contents General information..........................6 1.1 Further information........................... 7 1.2 Notational conventions........................8 1.3 Symbols and signal words....................... 8 Safety instructions..........................11 Features............................... 18 Installation..............................20 4.1 Dealing with lithium batteries..................... 24 Starting up..............................26 Connections and controls........................29 Operating..............................
  • Page 4 Table of contents 7.5 Functions in 2-channel DMX mode................... 45 7.6 Functions in 8-channel DMX mode................... 46 7.7 Functions in 11-channel DMX mode..................47 Technical specifications........................50 Plug and connection assignments....................53 Troubleshooting............................54 Cleaning............................... 57 Protecting the environment......................58 LED Accu Pad 7 7x10W RGBAWUV battery spot light...
  • Page 5 LED Accu Pad 7 7x10W RGBAWUV battery spot light...

  • Page 6: General Information

    Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de. LED Accu Pad 7 7x10W RGBAWUV...

  • Page 7: Further Information

    General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Use the search function in the electronic version to find the topics of Keyword search interest for you quickly.

  • Page 8: Notational Conventions

    General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’...
  • Page 9 General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
  • Page 10 General information Warning signs Type of danger Warning – suspended load. Warning – danger zone. LED Accu Pad 7 7x10W RGBAWUV battery spot light...

  • Page 11: Safety Instructions

    Safety instructions Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage.
  • Page 12 Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit.
  • Page 13 Safety instructions DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a pro‐ tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a regis‐ tered electrician.
  • Page 14 Safety instructions NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. LED Accu Pad 7 7x10W RGBAWUV battery spot light...
  • Page 15 Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’...
  • Page 16 Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user.
  • Page 17 Safety instructions NOTICE! Possible damage due to incorrect storage Deep discharge can cause batteries to become permanently damaged or lose some of their capacity. Before prolonged rest periods, charge the batteries to around 50 % of their capacity and then switch the equipment off. Store the equipment at a tempera‐ ture between 10 °C and 32 °C in as dry an environment as possible.

  • Page 18: Features

    Features Features The LED pad is suitable for almost all applications, for example in clubs, bars, small stages and theatres. It is characterized by small size, solid construction also for use ‘on tour’ and enormous power. Special features of the device: 7 ×...
  • Page 19 Features For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness. LED Accu Pad 7 7x10W RGBAWUV battery spot light...

  • Page 20: Installation

    Installation Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
  • Page 21 Installation NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
  • Page 22 Installation NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. Please note that this device must not be connected to a dimmer. LED Accu Pad 7 7x10W RGBAWUV battery spot light...
  • Page 23 Installation Inserting the battery into the Press the lock of the battery holder to the centre of the housing and pull out the battery holder remote control like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing base of the remote control.

  • Page 24: Dealing With Lithium Batteries

    Installation 4.1 Dealing with lithium batteries WARNING! Incorrect handling of lithium batteries can result in injury In the event of a short circuit, overheating or mechanical damage, lithium bat‐ teries can cause severe injuries. Follow the advice on the correct handling of lithium batteries in the present sec‐ tion.
  • Page 25 Installation Never attempt to recharge non-rechargeable lithium batteries. When charging lithium bat‐ teries you must use a suitable charging device intended for the purpose. Before disposing of the device remove the lithium batteries. Protect used lithium batteries against potential short circuits, e.g. by covering the poles with adhesive tape. Only use powder extinguishers or other suitable extinguishing agents to extinguish a burning lithium battery.

  • Page 26: Starting Up

    Starting up Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. LED Accu Pad 7 7x10W RGBAWUV battery spot light...
  • Page 27 Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain.
  • Page 28 Starting up Connections in master/slave When you configure a group of devices in master/slave mode, the first unit will control the mode other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the DMX output of the master device to the DMX input of the first slave device.

  • Page 29: Connections And Controls

    Connections and controls Connections and controls Top side LED Accu Pad 7 7x10W RGBAWUV battery spot light...
  • Page 30 Connections and controls 1 Locking screw for the bracket. 2 Lateral air vents 3 LEDs 4 Bracket for floor placement or hanging 5 Infrared sensor for receiving signals from the remote control LED Accu Pad 7 7x10W RGBAWUV battery spot light...
  • Page 31 Connections and controls Side view LED Accu Pad 7 7x10W RGBAWUV battery spot light...
  • Page 32 Connections and controls 6 Antenna for wireless DMX control. 7 [SIGNAL] Indicator for successfully established wireless DMX connection LED off: connection is disabled and ready for pairing LED flashes: connection is establishing LED on: connection is enabled 8 [BATTERY INDICATOR] Charge status indicator for built-in battery 9 DMX antenna holder 10 On / off switch...
  • Page 33 Connections and controls 13 [MENU]: Calls up the main menu or a submenu : Button to increase the displayed value by one : Button to decrease the displayed value by one [ENTER]: Confirms a selected value 14 Display 15 [DMX OUT] DMX output 16 [DMX IN] DMX input...
  • Page 34 Connections and controls Remote control LED Accu Pad 7 7x10W RGBAWUV battery spot light...
  • Page 35 Connections and controls 17 [SLAVE] Toggles operating modes ‘Master‘ and ‘Slave’. 18 [SPEED] Activates the setting mode for the programme speed. Adjust the speed using the buttons [UP] and [DOWN]. 19 [UP / DOWN] To select a desired program or increase / decrease a parameter value 20 [0 …...
  • Page 36 Connections and controls 24 [AUTO 1 & 2] Activates the ‘preprogrammed automatic show’ 1 or 2. 25 [POWER] Activates or deactivates the device. 26 [DMX] Press once to set the DMX address. After pressing twice, the DMX mode can be set. LED Accu Pad 7 7x10W RGBAWUV battery spot light...

  • Page 37: Operating

    Operating Operating 7.1 Starting the device Connect the device to the power grid. The built-in battery is now charging. If no segment of the charge status indicator is lit, the battery is exhausted and must be charged. If all 5 seg‐ ments are lit, charging is complete.
  • Page 38 Operating DMX address Press [MENU]. Press repeatedly until the display shows ‘AddR’ . Press [ENTER]. Now you can set the number of the first DMX channel to be used by the device (DMX address). Use to select a value between 1 and 512 (display shows ‘A001’ … ‘A512’ ). When the display shows the desired value, press [ENTER] to confirm the selection and then [MENU] to return to the parent menu.
  • Page 39 Operating DMX mode Press [MENU]. Press repeatedly until the display shows ‘CHnd’ . Press [ENTER]. Now use to select one of the following DMX operating modes: ‘1CH’ (one channel) ‘2CH’ (two channels) ‘8CH’ (eight channels) ‘11CH’ (eleven channels) This setting is only relevant when the device is controlled via DMX. When the display shows the desired value, press [ENTER] to confirm the selection and then [MENU] to return to the parent menu.
  • Page 40 Operating Operating mode ‘Slave’ Press [MENU]. Press repeatedly until the display shows ‘SLAV’ . Press [ENTER]. ‘SLA’ is flashing in the display. The device is now configured as slave and follows the settings of the master device to which it is connected. Press [MENU] to return to the parent menu. This setting is only relevant if the device is not controlled via DMX.
  • Page 41 Operating Reset to factory defaults Press [MENU]. Press repeatedly until the display shows ‘rSet’ . Press [ENTER] to reset the unit to factory defaults. This will erase all user settings. To return to the parent menu, press [MENU]. Colour selection Press [MENU].
  • Page 42 Operating Enabling or disabling wireless Press [MENU]. Press repeatedly until the display shows ‘rELE’ . Press [ENTER]. Press [ENTER] again. The display shows ‘UIFI’ . Press [ENTER] to enable the wireless module and then use until the display shows ‘on’ . Confirm with [ENTER].
  • Page 43 Operating Remote control Press [MENU]. Press repeatedly until the display shows ‘rEno’ . Press [ENTER]. Use to now either enable (display shows ‘On’ ) or disable (display shows ‘OFF’ ) the remote control function. When the display shows the desired value, press [ENTER] to confirm the selection and then [MENU] to return to the parent menu.

  • Page 44: Menu Overview

    Operating 7.3 Menu overview LED Accu Pad 7 7x10W RGBAWUV battery spot light...

  • Page 45: Function In 1-Channel Dmx Mode

    Operating 7.4 Function in 1-channel DMX mode Channel Value Function 0…255 36 different colour macros 7.5 Functions in 2-channel DMX mode Channel Value Function 0…255 Intensity (0 % to 100 %) 0…255 36 different colour macros LED Accu Pad 7 7x10W RGBAWUV battery spot light...

  • Page 46: Functions In 8-Channel Dmx Mode

    Operating 7.6 Functions in 8-channel DMX mode Channel Value Function 0…255 Intensity (0 % to 100 %) 0…255 Intensity red (0 % to 100 %) 0…255 Intensity green (0 % to 100 %) 0…255 Intensity blue (0 % to 100 %) 0…255 Intensity white (0 % to 100 %) 0…255...

  • Page 47: Functions In 11-Channel Dmx Mode

    Operating 7.7 Functions in 11-channel DMX mode Channel Value Function 0…255 Intensity (0 % to 100 %) 0…255 Intensity red (0 % to 100 %) 0…255 Intensity green (0 % to 100 %) 0…255 Intensity blue (0 % to 100 %) 0…255 Intensity white (0 % to 100 %) 0…255...
  • Page 48 Operating Channel Value Function 21…30 Ramp-down 31…40 Ramp-up/Ramp-down 41…50 Colour-change fade (5 colours) 51…60 Colour-change flash (6 colours) 61…70 Colour-change flash (27 colours) 71…80 Colour-change flash (24 colours) 81…90 Colour-change fade (6 colours) 91…100 Colour-change fade (red-green; white-ultraviolet) 101…110 Colour-change fade (red-blue; white-amber) 111…120 Colour-change fade (green-blue;...
  • Page 49 Operating Channel Value Function 0…127 Sound-controlled colour change (static) 128…255 Sound-controlled colour change (flash) LED Accu Pad 7 7x10W RGBAWUV battery spot light...

  • Page 50: Technical Specifications

    Technical specifications Technical specifications Light source 7 × 6in1 LEDs (RGBWAUV), each 10 W Optical properties Beam angle 23° Control Wireless DMX Remote control Buttons and display on the unit Number of DMX channels 1, 2, 8, 11 Input connections Power supply IEC chassis plug C14 DMX control...
  • Page 51 Technical specifications Supply voltage 100 – 240 V 50/60 Hz Fuse 5 mm × 20 mm, 3.15 A, 250 V, fast-acting Battery Battery type Lithium-ion Voltage 11.1 V Capacity 10400 mAh Battery for the remote control Battery type Lithium button cell, 3 V, CR 2025 Degree of protection IP20 Mounting options...
  • Page 52 Technical specifications Further information Design Up-Light LED type x-in-1 Base housing Fanless Remote control Included Wireless DMX Battery life LED Accu Pad 7 7x10W RGBAWUV battery spot light...

  • Page 53: Plug And Connection Assignments

    Plug and connection assignments Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed. Please take our tips, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a short circuit or ‘just’...

  • Page 54: Troubleshooting

    Troubleshooting Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation.
  • Page 55 Troubleshooting Symptom Remedy The unit does not work, no light Check the mains connection. If the device is operated independently from the mains power supply, check the charge status of the built-in battery. Apparently no function despite Check if the unit is in DMX mode or in ‘slave’ mode. If so, proper power supply check the unit in another mode.
  • Page 56 DMX interface circuit. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. LED Accu Pad 7 7x10W RGBAWUV battery spot light...

  • Page 57: Cleaning

    Cleaning Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device.

  • Page 58: Protecting The Environment

    Protecting the environment Protecting the environment Disposal of the packaging mate‐ rial For the packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
  • Page 59 Protecting the environment Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste. Dispose of this device through an approved waste disposal firm or through your local waste facility.
  • Page 60 Notes LED Accu Pad 7 7x10W RGBAWUV battery spot light...
  • Page 61 Notes LED Accu Pad 7 7x10W RGBAWUV battery spot light...
  • Page 62 Notes LED Accu Pad 7 7x10W RGBAWUV battery spot light...
  • Page 64 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...

Table of Contents