Table of Contents
Advertisement
Operation
3.2.6
Figure 16
Page 22
Data logging
NOTE. MetView logs data based on the MetPak configuration not on the MetView
console settings.
To log MetPak data, click on the Logging button on the MetView console. The
Logging dialog box is displayed.
Setting up data logging
Setting up a logging file
1.
Select Enable Logging to start logging to a file.
2.
Identify the name and location for the logging file:
Log File location
Log file header
3.
Choose from the following additional options:
Log File Rotation
Add Timestamp
MetPak User Manual
©
Gill Instruments Ltd
Click on the Browse button to identify the folder
where you want to store the data file. Enter the name
of the file.
If required type some notes on the data that is to be
recorded which will appear at the top of the saved
data log file.
Set up segmented logging with each logged file length
determined by the number entered in the text box
below. The figure 3600, for example, means that each
log file length will be 3600 lines of data. Maximum
entries per log file is limited to 65535 and a maximum
of 2048 log files can be created.
Adds the date and time to the logged data file taken
from the PC clock.
Last Change
12 March, 2013
Advertisement
Table of Contents
