Figure 5 Connection Of Gill Usb Cable (Part No. 1723-10-051); Figure 6 Rs232 Connections - Gill MetPak 1723-1B-2-111 User Manual

Installation
Connecting MetPak to a PC USB port using the Gill Configuration Cable 1723-10-051.
J5 Pin
Colour
Figure 5
NOTE:- If upon connecting the USB lead to a PC the driver is not found by the PC, then
the appropriate driver to match the PC Windows version may be downloaded from:-
http://www.ftdichip.com/Drivers/VCP.htm
Figure 6
Page 10
USB Lead Connection (COMMS set for RS232)
1 2 3
None None Yellow
Connection of Gill USB Cable (Part No. 1723-10-051)
Digital Output RS232 Connections (COMMS set for RS232)
This is the MetPak default communication configuration setting.
J5 Hub Box
8 Way Push fit Block
Pin nos.
Signal names
RS232 TX
RS232 RX
Signal Ground
Chassis Terminal
Ground
Supply -ve
Supply +ve
RS232 connections
MetPak User Manual
©
Gill Instruments Ltd
4 5
Orange None
3 Pair Cable
3
4
2
Screen wires
Post
7
8
Connect to
Hub box J5
6 7 8
None Black Red
PC 9 Way D Type
Connector
Pin Signal
No's Names
2 RXD
3 TXD
5 Sig Gnd
NA Chassis
Gnd
– DC Power
supply
+
Last Change
12 March, 2013