Table of Contents
Advertisement
NRF52840 Eval Kit User Manual
Running example:
When the flashing is complete, the script executes a reset operation to start the
example applications.
After the reset, the provisioner waits for user input. Follow these steps to see the
mesh network in actions:
1. Press Button1 on the provisioner board to start the provisioning process
a)
The provisioner first provisions and configures the client and assigns the
address 0x100 to the client node
b)
The two instances of the OnOff client models are instantiated on
separate secondary elements. For this reason, they get consecutive
addresses starting with 0x101
c)
Finally, the provisioner picks up the available devices at random, assigns
them consecutive addresses, and adds them to odd and even groups
d)
Observe the LED status on the provisioner, client and server boards.
e)
Wait until LED1 on the provisioner board remains ON steadily for a few
seconds, which indicates that all available boards have been provisioned
and configured
f)
Press buttons on the client board to change the state of LED1 on the
server boards:
i.
Press Button1 on the client board to turn ON LED1 on all servers
with ODD address
Vision: V1.0.1 Date: 2019.01.19
68 / 72
Advertisement
Table of Contents
