NRF52840 Eval Kit User Manual
【Note】 The slaver project is RSC project, it also can be HRM project
Expected result:
Power on Relay board, it begins to scan devices(master) and broadcasts(slaver).
⚫
LED1 and LED3 are on
Power on Sensor board, it begin to broadcast and LED1 is blinking, LED1 stay on if
⚫
Sensor board connected to Master successfully
Indicators of Relay Board
Indicators
LED1
On: Master is scanning (it keeps scanning even Slaver is connected)
LED2
On: Master has connected to slaver (slaver: sensor board)常
LED3
LED4
【Note】The pin of LED3 is not compatible with SDK, you need to wire it to P1.05
manually.
Vision: V1.0.1 Date: 2019.01.19
On: Slaver is broadcasting
On: Slaver is connected master (master: mobile phone)
Description
59 / 72