NRF52840 Eval Kit User Manual
Server:
⚫
During provisioning process:
◼
LED3 and 4 blinking: Device identification active
◆
LED1 to 4: Blink four times to indicate provisioning process is
◆
completed
After provisioning and configuration is over:
◼
LED1: Reflects the value of OnOff state on the server
◆
⚫
⚫
Client:
⚫
During provisioning process:
◼
LED3 and 4 blinking: Device identification active
◆
LED1 to 4: Blink four times to indicate provisioning process is
◆
completed
After provisioning and configuration is over, buttons on the client are
◼
used to send OnOff Set message to the servers:
Button1: Send a message to the odd group(address: 0xC003) to turn
◆
on LED1
Button2: Send a message to the odd group (address: 0xC003) to turn
◆
off LED1
Button3: Send a message to the even group (address: 0xC002) to
◆
turn on LED1
Vision: V1.0.1 Date: 2019.01.19
LED ON: Value of the OnOff state is 1 (true)
LED OFF: Value of the OnOff state is 0 (false).
63 / 72