Emerson Dixell XR75CX Series Installation And Operation Manual page 33

Label
dtE Defrost termination temperature
idF Interval between defrost cycles
MdF (Maximum) length for defrost
dSd Start defrost delay
dFd Displaying during defrost
dAd MAX display delay after defrost
Fdt Draining time
dPo First defrost after start-up
dAF Defrost delay after fast freezing
FnC Fan operating mode
Fnd Fan delay after defrost
Differential of temperature to force
FCt
fan activation
FSt Fan stop temperature
Fon Fan on time with compressor off
FoF Fan off time with compressor off
FAP Probe selection for fan management
ACH Kind of action for auxiliary relay
SAA Setpoint for auxiliary relay
SHY Differential for auxiliary relay
ArP Probe selection for auxiliary relay
Auxiliary relay operating during
Sdd
defrost
ALP Alarm probe selection
ALC Temperat. alarms configuration
ALU MAXIMUM temperature alarm
ALL Minimum temperature alarm
Differential for temperat. alarm
AFH
recovery
ALd Temperature alarm delay
dAo Delay of temperature alarm at start up
Probe for temperat. alarm of
AP2
condenser
AL2 Condenser for low temperat. alarm
Table 19-1- XR75CX Default Setting Values (
MODBUS Termination Blocks
Name
2
Only for XR75CX with X-REP output)
Range
[-50 to 50°C]
[-50 to 122°F]
1 to 120 hours
0 to 255 min
0 to 99 min
rt, it, SEt, DEF
0 to 255 min
0 to 120 min
n=after idF; Y=immed.
0 to 24h 00min, res. 10min
C-n; o-n; C-Y; o-Y
0 to 255 min
[0 to 50°C]
[0 to 90°F]
[-50 to 50°C]
[-58 to 122°F]
0 to 15 min
0 to 15 min
nP; P1; P2; P3; P4
CL; Ht
[-50 to 110°C]
[-58 to 230°F]
[0.1 to 25.5°C]
[1 to 45°F]
nP; P1; P2; P3; P4
n; Y
nP; P1; P2; P3; P4
rE= related to set;
Ab = absolute
[SEt to 110.0°C]
[SEt to 230°F]
[-50°C to SEt]
[-58°F to SEt]
[0.1°C to 25.5°C]
[1°F to 45°F]
0 to 255 min
0 to 24h 00min, res. 10min
nP; P1; P2; P3; P4
[-50 to 110°C]
[-58 to 230°F]
Value Level
[8°C]
Pr1
[46°F]
6 Pr1
30 Pr1
0 Pr2
it Pr2
30 Pr2
0 Pr2
n Pr2
0.0 Pr2
o-n Pr1
10 Pr1
[10°C]
Pr2
[10°F]
[36°C]
Pr1
[23°F]
0 Pr2
0 Pr2
P2 Pr2
CL Pr2
[0.0°C]
Pr2
[32°F]
[2.0°C]
Pr2
[2°F]
nP Pr2
n Pr2
P1 Pr2
Ab Pr2
[110°C]
Pr1
[230°F]
[-50.0°C]
Pr1
[-58°F]
[2.0°C]
Pr2
[2°F]
15 Pr2
1.3 Pr2
P4 Pr2
[-40.0°C]
Pr2
[-40°F]
Default Setting Values • 27