Polaroid PlaySmart User Manual page 7

Set-up your printer by first attaching the PTFE tube. Place one end into the
7
printer head and the other end into the extruder
Connect the power cable to the back of the printer and then to the wall, and
8
turn on the printer using the power switch (also on the back of the printer).
Be careful not to damage the cables.
Follow the instructions on the LCD screen
9
to complete set-up:
1. Select your language.
2. Press 'Start'.
3. Ensure WLAN is turned on (showing
green) and then select a Wi-Fi network
to connect your Polaroid PlaySmart 3D
Printer to (or alternatively skip this step
– you can set-up at any point later).
4. Once connected, click 'Next'.
5. Download the Polaroid PlaySmart
App to your mobile phone from the
App Store or Google Play Store (or
alternatively skip this step – you can
set-up at any point later).
6. Select 'Next' once installed.
7. Check for firmware updates and
ensure that you have the latest version
installed.
8. Click 'Finish' to complete the set-up
process.
7
PTFE Tube
Insert
Insert
Printer
Extruder
.
PTFE Tube
English
English
French
Deutsch
German
Italiano
Italian
Esp
Spanish
Nederlands
Duth