Polaroid PlaySmart User Manual page 20

PREPARING, PRINTING AND SAVING YOUR SCENE
If copying an object when you first open
Polaroid SmartPrep, it will copy one object
behind another (as shown in the first image),
allowing you to then arrange the items on the
print bed as you wish. You will notice that this
even keeps copying objects outside of the print
bed area (the model shown in grey).
Alternatively, if you click on Settings at the
top left of the screen you will be able to select
Auto Arrange. This will then place objects into
the optimum print position (to minimise the
movement of the printhead) when copying
objects (as shown in the second image).
If you see an image in grey within your
workspace it means that it is partially or wholly
outside of the print bed area. If you choose to
print at this point, the object in grey will simply
be ignored.
If you happen to overlap one model with
another, you will see that they turn orange (as
seen in the third image). This is to identify to
you that they have overlapped, however the
software will allow you to continue printing
and the overlapped objects will print as they
appear, i.e. merged into one new model.
If you have multiple objects to print but not
all at one time, then you can simply place the
models you want to print later off the print bed
but within the workspace area (shown in light
blue) and then select File and Save Scene from
the headers at the top left corner of the screen.
You can then return to this scene at any point
in the future to continue printing the other
models from the workspace area.
20