Ricoh SR3180 Field Service Manual
  1. Manuals
  2. Brands
  3. Ricoh Manuals
  4. Printer Accessories
  5. SR3180
  6. Field service manual
Ricoh SR3180 Field Service Manual

Ricoh SR3180 Field Service Manual

Internal finisher
Hide thumbs
Table of Contents

Advertisement

Quick Links

Internal Finisher SR3180
Machine Code: D766
Field Service Manual
July, 2014
Subject to change

Advertisement

Table of Contents
loading

Related Manuals for Ricoh SR3180

Summary of Contents for Ricoh SR3180

  • Page 1 Internal Finisher SR3180 Machine Code: D766 Field Service Manual July, 2014 Subject to change...

  • Page 3: Revision Lists

    Revision Lists Version Section Details Initial release of this document. 1.00 Created for D146 series. Revised all sections according to the 1.10 release of D197 series Read This First > Safety and Symbols Changed some icons. Replacement and Adjustment > Finisher Front Cover >...
  • Page 4 Version Section Details Replacement and Adjustment > Junction Solenoid Motor HP Sensor Modified items need to be removed in Replacement and Adjustment > Paper Output Step 2. Full Sensor 1 / Paper Output Full Sensor 2 (Staple) Replacement and Adjustment > Stapler Unit Modified the Procedure.

  • Page 5: Safety And Symbols

    Safety and Symbols This manual uses several symbols and abbreviations. The meaning of those symbols and abbreviations are as follows: Clip ring Screw Connector Clamp Short Edge Feed Long Edge Feed [A] Short Edge Feed (SEF) [B] Long Edge Feed (LEF) Trademarks ®...

  • Page 6: Table Of Contents

    TABLE OF CONTENTS Revision Lists................................1 Safety and Symbols............................3 Trademarks..............................3 1. Replacement and Adjustment Internal Finisher SR3180...........................5 Finisher Front Cover............................7 Finisher Upper Cover............................8 Paper Output Tray..............................9 Paper Output Cover............................10 Rear Cover................................11 Control Board..............................12 Entrance Sensor..............................13 Transport Motor...............................14 Shift Motor................................15 Junction Solenoid Motor..........................16 Exit Paper Pressure Motor..........................17...

  • Page 7: Replacement And Adjustment

    1. Replacement and Adjustment Internal Finisher SR3180 Interface cable [A]. Paper output tray [A] ( ×2).
  • Page 8 1. Replacement and Adjustment Cover [A] ( ×2). Screw on the Finisher [A] ( ×1). Finisher [A].

  • Page 9: Finisher

    Finisher Front Cover Finisher Front Cover Paper output cover (page 10). Finisher front cover [A] ( ×2).

  • Page 10: Finisher Upper Cover

    1. Replacement and Adjustment Finisher Upper Cover Finisher front cover (page Finisher upper cover [A] ( ×1).

  • Page 11: Paper Output Tray

    Paper Output Tray Paper Output Tray Paper output tray [A] ( ×2).

  • Page 12: Paper Output Cover

    1. Replacement and Adjustment Paper Output Cover Internal Finisher (page Paper output cover [A] ( ×2).

  • Page 13: Rear Cover

    Rear Cover Rear Cover Finisher (page Rear cover [A] ( ×2). • The screw on the right as you face the rear cover [A] is a step screw...

  • Page 14: Control Board

    1. Replacement and Adjustment Control Board Paper output cover (page 10). Control board [A] ( ×4, ×all).

  • Page 15: Entrance Sensor

    Entrance Sensor Entrance Sensor Rear cover (page 11). Remove the entrance sensor [A] together with the bracket ( ×1, ×1). Entrance sensor [A] ( ×1, ×1).

  • Page 16: Transport Motor

    1. Replacement and Adjustment Transport Motor Finisher front cover (page Disconnect the connecter attached to the transport motor [A] ( ×1). Loosen the screw securing the spring bracket [A], and then release the belt tension ( ×1). Transport motor [A] ( ×2).

  • Page 17: Shift Motor

    Shift Motor Shift Motor Finisher front cover (page Shift motor [A] ( ×2, ×1, ×2).

  • Page 18: Junction Solenoid Motor

    1. Replacement and Adjustment Junction Solenoid Motor Paper output cover (page 10). Release the clamp ( ×1). Junction solenoid motor [A] ( ×2, ×1).

  • Page 19: Exit Paper Pressure Motor

    Exit Paper Pressure Motor Exit Paper Pressure Motor Paper output cover (page 10). Rear cover (page 11). Release the clamp ( ×1). Remove the screws on the bracket [A] ( ×2).
  • Page 20 1. Replacement and Adjustment Exit paper pressure motor [A] ( ×1).

  • Page 21: Side-To-Side Registration Sensor

    Side-to-Side Registration Sensor Side-to-Side Registration Sensor Finisher upper cover (page Remove the screw ( ×1). Remove the Side-to-Side registration sensor [A] together with the bracket ( ×1).
  • Page 22 1. Replacement and Adjustment Side-to-Side registration sensor [A].

  • Page 23: Open/Close Door Switch

    Open/Close Door Switch Open/Close Door Switch Rear cover (page 11). Remove the screw ( ×1). Open/close door switch [A] ( ×1).

  • Page 24: Shift Home Position Sensor

    1. Replacement and Adjustment Shift Home Position Sensor Finisher front cover (page Remove the shift home position sensor [A] together with the bracket ( ×1, ×1). Shift home position sensor [A] ( ×1).

  • Page 25: Paper Output Sensor

    Paper Output Sensor Paper Output Sensor Finisher upper cover (page Remove the screw ( ×1). Paper output sensor [A] ( ×1).

  • Page 26: Paper Output Pressure Hp Sensor

    1. Replacement and Adjustment Paper Output Pressure HP Sensor Paper output cover (page 10). Remove the screw and release the clamp ( ×1, ×1). Paper output pressure HP sensor [A] ( ×1).

  • Page 27: Junction Solenoid Motor Hp Sensor

    Junction Solenoid Motor HP Sensor Junction Solenoid Motor HP Sensor Remove the screw ( ×1). Junction solenoid motor HP sensor [A] ( ×1, ×1)

  • Page 28: Paper Output Full Sensor 1 / Paper Output Full Sensor 2 (Staple)

    1. Replacement and Adjustment Paper Output Full Sensor 1 / Paper Output Full Sensor 2 (Staple) Paper output cover (page 10). Paper output full sensor 1 [A], paper output full sensor 2 [B] ( ×1, ×1, for each).

  • Page 29: Stapler Unit

    Stapler Unit Stapler Unit Rear cover (page 11). Disconnect the connecter and release the clamps ( ×1, ×2). Turn the finisher [A] over.
  • Page 30 1. Replacement and Adjustment Remove the screws securing the stapler unit [A] ( ×5). Stapler unit [A] ( ×1).
  • Page 31 Stapler Unit Bracket [A] from the Stapler unit ( ×2).

  • Page 32: Stapler Drive Hp Sensor

    1. Replacement and Adjustment Stapler Drive HP Sensor Stapler unit (page 27). Loosen the screw and release the clamp ( ×1, ×1). Stapler drive HP sensor [A] from the bracket ( ×1, ×1).

  • Page 33: Stapler Motor

    Stapler Motor Stapler Motor Stapler unit (page 27). Stapler drive HP sensor (page 30). Stapler motor [A] ( ×2).
  • Page 34 MEMO...

Table of Contents