Subscribe to Our Youtube Channel
Related Manuals for Bahco H9-220
Summary of Contents for Bahco H9-220
- Page 1 OPERATING MANUAL & SPARE PART LIST AIR HYDRAULIC HOLE PUNCHER H9-220 Documentation commissioner: Andreas Bos Edition: 02.2017...
- Page 2 The tool shall be maintained in a safe working condition and examined regulary by trained and competent personnel. Use only parts with this tool, which are recommended an supplied by BAHCO. 10 Any modifi cation undertaken by the customer to the tool, shall be the customers entire responsibility.
- Page 3 TECHNICAL DATA Connection to the air supply We recommended the use of pressure regulators and oiling/fi lter systems on the main air supply (see diagram below). All air hoses must have a minimum inner diameter of 6 mm or ¼ inch. the tool is operated at an optimum pressure of 6 bar or 90 Psi. Technical Description H9 is a hydro-pneumatic tool.
- Page 4 Adjust to 5-7 bat / 75-100 Psi Low oil level Prime tool Damaged punch edges Replace punch and punch die Leaks oil Worn or defected seals Replace seals, unse BAHCO seal kit and prime tool Recommende spare parts Art. No. Description P-H9-220 Seal kit...
- Page 5 TECHNICAL DATA...
- Page 6 TECHNICAL DATA PART LIST - H9-220 Pos. Ref. Qty Description Pos. Ref. Qty Description 1336 Spring 5472 1337 Vlave 6514 Seal 1339 Spring 5042 Oil screw 1565 Silencer 2733-2 Hydraulic piston 5401 2970-12 1 Cross bar 5014 Screw 6326 O-Ring...
- Page 7 BAHCO GmbH & Co.KG Martener Hellweg 60 DE- 44379 Dortmund Phone +49 231 / 91 72 11-0 +49 231 / 91 72 11-22 www.bahco.de info@bahco.de...
Need help?
Do you have a question about the H9-220 and is the answer not in the manual?
Questions and answers