Alert Notification; Silence All - Sanyo SCP-8500 User Manual

Sony cell phone user manual
Hide thumbs Also See for SCP-8500:
Table of Contents

Advertisement

Alert Notification

Your phone can alert you with an audible tone when you change
service areas, when there are incoming calls or messages, or
when your network signal is fading. Your phone can also alert
you once a minute during a call, or when a call has been
connected.
To set alerts:
1. Select
> Settings > Sounds > Alerts.
2. Select an option and press
Beep Each Minute to set a minute reminder that beeps ten
seconds before the end of each minute during a call.
Out of Service to set an alert to notify you of network
services parameter changes.
Connect to set an alert to notify you when your call has
been connected.
Signal Fade/Call Drop to set an alert to notify you when
your phone loses a signal during a call.
Messaging to set an alert to notify you of text messages,
picture messages, or voicemails.
Repeat to select a repeating status of the alarm (Once,
Repeat Alert or Off).
Ringer Length to set the duration for the alarm to ring.
Tip:
You can also set the Messaging alert by selecting
Messaging > Message Reminder > Text Message
Voicemail
.
3. Select a setting and press

Silence All

With the phone open, press and hold the Side Volume key
down in standby mode. (The screen will display "Silence All.")
To deactivate, with the phone open, press the Side
Volume key up repeatedly to select a volume level.
Tip:
You can also select
:
.
Vibrate All
to set your phone to vibrate only.
4. Your Phone's Settings
> Settings >
Picture Msg
,
, or
35

Advertisement

Table of Contents
loading

Table of Contents