Entering Text; Standard Text Entry - Sony CMD-Z7 Operating Instructions Manual

Entering Text

You have the possibility to enter characters:
• Standard Text Entry using the keypad.
• Standard Text Entry using the Jog Dial.
• Text Entry using the T9 fast text entry
method.

Standard Text Entry

Using the keypad
Press the corresponding alphanumeric key
multiple times until the desired character
appears.
Using the Jog Dial
Press a key once and then rotate the Jog Dial
until the desired character appears. Press the
Jog Dial or wait for a moment to confirm.
22 GB
Example: To enter "s" when creating
a message:
1 Proceed as in Create (see page 31), then
2 Press
. A character or number
appears.
3 Rotate the Jog Dial to "s".
4 Press the Jog Dial (or wait) to confirm.
• Press to shift among:
lower case letters permanently
upper case letter and then revert back
to lower case
upper case letters permanently
numbers
• Press and hold to activate/deactivate the T9
function (see page 23).
• Press to clear the character or number just
before the cursor. To clear the entire text, press
and hold .