Sony CMD-J5 Operating Instructions Manual page 59

filename[K:\595_sony\59501001\Cmd_j6\01GB03MAN.fm]
01GB.book Page 59 Friday, April 27, 2001 1:08 PM
The browser can be configured to access WAP or HTML sites. The
procedure to set up the configuration depends on the server type. See
an example for WAP below.
1
Select WAP from the main menu. Then select Settings.
2
Select the first field labeled Empty and then select Edit.
3
Enter the Security Code (default 0000) at the prompt (see also
page 41).
4
Select Name to enter a name that will be displayed for your
site.
Name: My Provider
5
Select Home Page to enter the URL of the home page specified
by your Network Operator/Service Provider.
Home Page: wap.myprovider.com
6
Select Server Type to select WAP or HTML depending on
which type of server your provider has.
Server Type: WAP
7
Select Bearer Service to specify the bearer type (Data or SMS)
your Network Operator/Service Provider requires.
Bearer Service: Data
8
Select Provider to set the following parameters specified by
your Network Operator/Service Provider:
Dial Up Number: +12 345 67 890
(number to access the gateway)
ISP User Name: abc (name of the gateway)
ISP Password: sony (gateway password)
Data Call Type: Automatic
9
Select the arrow to return to the Edit menu.
10
Select GW Server to enter the address of the gateway server of
your Network Operator/Service Provider.
GW Server: 10.255.255.255
model name1[MZ-R70] model name2[MZ------]
masterpage:Right
59
[3-232-169-11(2)]