Sony CMD-J5 Operating Instructions Manual page 43

masterpage:Right
filename[K:\595_sony\59501001\Cmd_j6\01GB03MAN.fm]
01GB.book Page 43 Friday, April 27, 2001 1:08 PM
Call Settings
Some of the following features may not be supported by some
network. Contact your Network Operator/Service Operator for
details.
Caller ID
Choose whether or not you want the party you are calling to see your
telephone number. Select Caller ID from the Call Settings menu. Use
the Jog Dial to select On, Off or Default (network default).
Select Line
Some Network Operators offer the possibility to select between two
separate phone lines on your SIM card. This is useful e.g. for
separating business and private call costs.
To make a line selection in standby mode, press and hold and
use the Jog Dial to make your selection. 1 or 2 will appear so that you
know which line is active. It is also possible to make the line
selection using the Call Settings menu option.
Some menu items may not appear in your phone in some networks
unless you specifically subscribe for them. The following settings
(e.g. Divert, Security, Ringer Tone, Call Waiting and Voicemail) will
apply to the currently selected line. Some items such as your own
number entry and voicemail entry may not be edited. All calls made
will be billed to the currently selected line. The Call Time and Call
Cost settings however, will always show the total time or cost of both
lines.
Call Waiting
If activated, your phone will alert you (beep) that a call is waiting so
that you don't miss any calls. Select Call Waiting and use the Jog
Dial to select Activate, Cancel or Check Status.
Any Key Answer
Answer a call by pressing any key on the keypad.
Select Any Key Answer and use the Jog Dial to select On or Off.
43
model name1[MZ-R70] model name2[MZ------]
[3-232-169-11(2)]