Answering/Ending Calls - Sony CMD-J5 Operating Instructions Manual

filename[K:\595_sony\59501001\Cmd_j6\01GB03MAN.fm]
01GB.book Page 16 Friday, April 27, 2001 1:08 PM
Important Important Important Important Notes
To search the Phonebook, press an alphanumeric key on the keypad to advance
to that letter in the Phonebook. (E.g. to advance to entries beginning with "M
press ).

Answering/Ending Calls

Press the Jog Dial (or
Important Important Important Important Notes
If you do not wish to answer the call, press
The call will then be rejected (the caller will hear a busy tone or will be
diverted if a divert has been set).
If a call is not answered,
Press in standby mode or select the Call History from the Main Menu for
information about the missed call. Press
Press to end a phone call.
Notes Important Important Important Important
In very rare cases, ciphering does not work in some networks, meaning that
third parties can listen to your phone call. In this case,
display.
When the Headset is connected to your phone, answer a call by
pressing the Headset button (beep). Press and hold the Headset button
to end the call (2x beep).
Connect/disconnect the headset only when the phone is switched off
or in stand-by mode (operator's name appears on the display).
16
model name1[MZ-R70] model name2[MZ------]
) to accept an incoming call.
while the phone is ringing.
appears on the top line of the display.
to remove the icon.
masterpage:Left
"
,
appears on the
[3-232-169-11(2)]