Table of Contents
Advertisement
•
The Centre Key
Press the Centre Key in standby mode to access the Main Menu.
During a call, press the Centre Key to access the Call Menu.
In Sub-menus, access/exit the help function by pressing the Centre Key
•
The Voicemail Key
Press and hold
•
The Side Switch
In standby mode, slide the switch up to activate/deactivate the manner modes.
Afterwards, it is possible to switch among the manner mode functions. All manner mode icons appear
in the display; rotate the Jog Dial to select one:
Silent Mode
Ringer to Single beep
Vibra Alert
For your convenience, sliding the side switch up in standby mode will toggle between the two last
settings.
In standby mode, slide the switch down to lock/unlock your keypad (including Jog Dial). It is still
possible to make emergency calls (112) as well as answer/reject an incoming call (by pressing
) when the keypad is locked.
During a call, turn the loudspeaker on by sliding the switch up once. Turn the loudspeaker off by
sliding the switch up again.
During an incoming call, stop the ringer by sliding the side switch up.
During a game, stop/start the backround sound by sliding the side switch up.
3.2 Security Codes
CODE TYPE
PIN
Personal Identification Number
PIN 2
PIN / PIN 2
Personal Unblocking Key
(PUK / PUK 2)
Bearing Password
Security Code
to access your Voicemail
:turns the ringer and all tones to silent mode.
:ringer is restricted to a discrete single beep.
:Vibra Alert without the ringer.
NUMBER OF
DIGITS
4 to 8
4 to 8
8
4
4 to 8
DESCRIPTION
Controls SIM security. Supplied by the
Service Provider !
Controls memory security. Supplied by the
Service Provider !
Used to unblock PIN and PIN 2.
A PIN or PIN 2 will become blocked if the wrong
PIN or PIN 2 is entered three times.
When the blocked PIN or PIN 2 is unblocked, a
new PIN or PIN 2 must be entered. If the wrong
PUK or PUK 2 is entered 10 times, the SIM card
will be unusable.
Supplied by the Service Provider !
Controls the call bar function. If the wrong
password is entered three times, this
service will be revoked.
Supplied by the Service Provider !
Controls the access to wap-and e-mail settings.
The default Security Code is: 0000
Refer to Section 5 "Programming Instructions"
9
/
Advertisement
Table of Contents
