NEC AP300 Installation Manual page 37

14. Lead the cable to the AP300 and mount the RJ45 connector to it using the tool for
mounting an RJ45 connector plug to a Category 5 cable. For standard colour
schemes, consult Chapter 4. WIRE COLOUR CODING FOR CATEGORY 5
CABLES.
15. If not yet done, connect the RJ45 connector to the AP300 (at the rear side) and push
the Category 5 Ethernet cable into the round foam-free area in the rear side of the
cabinet.
16. Push the AP300 into its position in the foam.
8
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
Figure 9. Cable run in the Cabinet.
Figure 10. AP300 in it's position in the cabinet.
Outdoor Cabinet Isolated - Installation Manual March 2010