NEC AP300 Installation Manual page 15

6. Make sure that the antennas are properly locked into the locks in the AP300 cover.
7. Move the antenna cover carefully over the antennas in the vertical position and make
sure that the antennas do not bend. When the antenna cover is in its position, push it
further into its position in the AP300 cabinet to fix it.
8. Now your AP300 is ready to be installed.
March 2010
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
Figure 7. Detail of antenna in lock.
Figure 8. Cover installed.
AP300 Customer Engineer Manual 9