Conventions Used In This Manual - Delphi Multec 3.5 Applications Manual

Introduction

Conventions Used in this Manual

1.7
1-4
Section 7.0 — Recommendations and Precautions
Section 7.0 provides a summary of Delphi recommendations and
precautions for proper fuel injector use. Common misuses are identified
and alternate solutions presented.
Section 8.0 — Testing Procedures
Section 8.0 discusses testing procedures that are based on the experience
of Delphi and its customers. Adhering to the recommendations contained
in this section will ensure that the fuel injector is evaluated correctly under
conditions that parallel normal use and operation.
Section 9.0 — Validation Requirements
Section 9.0 outlines the process for validating the fuel injector, i.e.,
ensuring that it meets specified quality, reliability, and durability goals
and conforms to governmental standards/regulations.
Section 10 - Appendix
10.1— Introduction
10.2— Injector/ System Component Checklist
10.3— Multec 3.5 Injector Application Guideline Checklist
10.4— Component Assembly Best Practices
10.5— Glossary of Terms and Abbreviations
Section 11.0 — Index
The pages in this manual are formatted with a wide left margin. The
purpose of this format is to help locate important topics throughout the
document. The left margin contains additional information:
• key words and information to which special attention must be paid.
Other important information is shown in italic type and is preceded with
the boldface word NOTE, CAUTION, or WARNING.
•
Note—Indicates important technical detail that is relevant to the topic
being discussed.
•
Caution —Indicates information about a condition or an activity that
must be performed to prevent damage to the Multec 3.5 Fuel Injector,
fuel system, electronic control system, engine or the vehicle.
•
Warning —Indicates a condition that might pose a risk to personal
safety.
Multec 3.5 Fuel Injector Application Manual
Delphi Energy and Chassis Systems
Revision: 11/05-01