Notes - CompAir L07 User Manual

1. Foreword
Fig. 2
1.4

Notes

General
These operating instructions are intended to familiarize
the user with the machine/unit and its intended use. The
instructions contain important notes on how to operate
the compressor safely, properly and cost-effectively.
Observing these instructions helps to avoid risks, to
reduce repair costs and downtimes and to increase the
reliability and service life of the machine/unit.
The operating instructions have to be supplemented by
the respective national rules and regulations regarding
the prevention of accidents and environmental
protection. They must always be available at the
location of the machine/unit. The operating instructions
must be read and followed by any person carrying out
work in connection with the machine/unit, e.g.
operation, including setting up, trouble-shooting in the
operation cycles, disposal of production waste, care,
service, and disposal of waste fuels and consumables,
upkeep (maintenance, inspection, repair), transport.
Besides the operating instructions and the binding
regulations for the prevention of accidents, which are
valid in the country and place of operation of the
machine/unit, the generally recognized technical
regulations for safe and proper working have also to be
observed.
6
Guarantee
Operate this compressor only if you have an exact
knowledge of the machine taking into respect these
instructions.
CompAir cannot be held responsible for the safe
operation of the machine/unit if it is used in a manner
which does not correspond to the intended use, or for
other applications which are not mentioned in these
instructions.
Warranty claims will not be accepted in the case of
•
Operating errors
•
Incorrect maintenance
•
Wrong auxiliary materials
•
Use of spare parts other than CompAir genuine
spare parts
•
Modifications and changes to the installation
The warranty and liability conditions of the general
terms and conditions of CompAir will not be extended
by the notes above.
Any unauthorized change to the compressor unit/
station, or the installation of components not accepted
by the manufacturer (e.g. fine separator) will result in
the withdrawal of the CE mark. As a consequence, any
liability and warranty claims will not be accepted by the
manufacturer.
Safety regulations
Danger
The safety regulations in chapter 3 of the operating
instructions have to be strictly observed.
Technical changes
In the course of technical development we reserve the
right to modify the units without further notice.