4
Pull the keyboard cable from the gap in the palmrest and connect to the connector on the keyboard interposer board [1, 2].
Next steps
1
Install the battery.
2
Install the
base
cover.
3
Install the
microSD
card.
4
Follow the procedure in
System board
Removing the system board
Prerequisites
1
Follow the procedure in
2
Remove the
microSD
3
Remove the
base
cover.
4
Remove the battery.
Steps
1
Remove the single (M2.0x3.0) screw that secures the wireless bracket to the system board [1].
2
Lift the wireless bracket away from the computer [2].
3
Disconnect the two wireless antennas from the connector on the system board [3].
after working inside your
before working inside your
card.
computer.
computer.
Removing and Installing
45